IBM 000-918 최신덤프

우리ITExamDump에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리ITExamDump 사이트에서 제공하는IBM 000-918관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.

IBM인증 000-918시험을 패스하여 자격증을 취득하여 승진이나 이직을 꿈구고 있는 분이신가요? 이 글을 읽게 된다면IBM인증 000-918시험패스를 위해 공부자료를 마련하고 싶은 마음이 크다는것을 알고 있어 시장에서 가장 저렴하고 가장 최신버전의 IBM인증 000-918덤프자료를 강추해드립니다. 높은 시험패스율을 자랑하고 있는IBM인증 000-918덤프는 여러분이 승진으로 향해 달리는 길에 날개를 펼쳐드립니다.자격증을 하루 빨리 취득하여 승진꿈을 이루세요.

IBM 000-918인증시험을 패스하고 자격증 취득으로 하여 여러분의 인생은 많은 인생역전이 이루어질 것입니다. 회사, 생활에서는 물론 많은 업그레이드가 있을 것입니다. 하지만000-918시험은IBM인증의 아주 중요한 시험으로서000-918시험패스는 쉬운 것도 아닙니다.

우리ITExamDump에는 아주 엘리트한 전문가들로 구성된 팀입니다. 우리는 아주 정확하게 또한 아주 신속히IBM 000-918관한 자료를 제공하며, 업데이트될경우 또한 아주 빠르게 뉴버전을 여러분한테 보내드립니다. ITExamDump는 관련업계에서도 우리만의 브랜드이미지를 지니고 있으며 많은 고객들의 찬사를 받았습니다. 현재IBM 000-918인증시험패스는 아주 어렵습니다, 하지만 ITExamDump의 자료로 충분히 시험 패스할 수 있습니다.

IBM 000-918인증시험패스는 아주 어렵습니다. 자기에맞는 현명한 학습자료선택은 성공을 내딛는 첫발입니다. 퍼펙트한 자료만의 시험에 성공할수 있습니다. Pass4Tes시험문제와 답이야 말로 퍼펙트한 자료이죠. 우리IBM 000-918인증시험자료는 100%보장을 드립니다. 또한 구매 후 일년무료 업데이트버전을 받을 수 있는 기회를 얻을 수 있습니다.

시험 번호/코드: 000-918

시험 이름: IBM (System Administration for IBM Informix Dynamic Server V11)

ITExamDump에서는IBM 인증000-918시험대비덤프를 발췌하여 제공해드립니다. IBM 인증000-918시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인IBM 인증000-918시험대비덤프로IBM 인증000-918시험준비공부를 해보세요. 통과율이 100%입니다.

000-918 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-918.html

NO.1 Given the following 'onstat -g arc' information:
IBM Informix Dynamic Server Version 11.10.FC1 -- On-Line -- Up 45:18:13 -- 38912 Kbytes
num DBSpace Q Size Q Len Buffer partnum size scanner
Dbspaces - Archive Status
name number level date log log-position
rootdbs 1 0 02/11/2007.22:01 43 0x5338c
1 02/14/2007.22:01 66 0x1b2e8
2 02/16/2007.22:01 75 0x1d2e8
dbs1 2 0 02/14/2007.22:01 43 0x5338c
1 02/14/2007.22:01 66 0x1b2e8
2 02/16/2007.22:01 75 0x1d2e8
On February 16, 2007, at 1:00 PM, a chunk in dbspace bs1 encountered hardware failure.
Which method will restore all of the data, to the point of failure, to a replacement disk drive?
A. a level 0 and 2 restore followed by a logical log restore
B. a level 0 and 1 restore only
C. a level 0 and 1 restore followed by a logical log restore
D. a level 0, 1, and 2 restore followed by a logical log restore
Answer: C

IBM dumps   000-918덤프   000-918 dumps   000-918 pdf

NO.2 What will the setting "SQLTRACE level=LOW,ntraces=2000,size=2,mode=global" within the Informix
onconfig file record?
A. statement statistics, statement text, and list of table names
B. statement text, host variables, and statement iterators
C. statement statistics, statement text, and statement iterators
D. statement text, statement iterators, and database name
Answer: C

IBM   000-918   000-918 dumps   000-918최신덤프

NO.3 A database administrator uses the following onconfig parameters:
TAPEDEV = /foo/resdev
How will this affect ontape backup?
A. ontape will use the directory /foo/resdev if it exists for storage space backup.
B. ontape will use the definitions for TAPEBLK from the file /foo/resdev.
C. ontape will write an informational message to the file /foo/resdev.
D. ontape will use the definitions for TAPESIZE from the file /foo/resdev.
Answer:A

IBM   000-918인증   000-918 dump   000-918자격증   000-918

NO.4 You detected excessive memory usage that might be caused by a memory leak in the application.
Which twocommands would be useful in this scenario? (Choose two.)
A. onstat -u
B. onstat -g sql -r 120
C. onstat -g ses -r 60
D. onstat -g mgm
E. onstat -g mem
Answer: CE

IBM시험문제   000-918자격증   000-918 pdf   000-918

NO.5 You are receiving an error when trying to drop a chunk that you think is empty. Which command will
show you if any object is still allocating part of the chunk?
A. oncheck -pe
B. onstat -d
C. oncheck -cD
D. oncheck -cc
Answer:A

IBM덤프   000-918인증   000-918자료

NO.6 Which command would be used to monitor disk activity per chunk?
A. onstat -g iog
B. onstat -d
C. onstat -g iof
D. onstat -F
Answer: C

IBM   000-918   000-918자격증   000-918자료   000-918

NO.7 An Informix database server has been configured with the following parameters:
BAR_MAX_BACKUP 5
BAR_NB_XPORT_COUNT 4
BAR_XFER_BUF_SIZE 10
How many data buffers will be created during an onbar parallel backup attempt?
A. 50
B. 20
C. 40
D. 25
Answer: B

IBM인증   000-918덤프   000-918 dump   000-918

NO.8 The table called "state" has lock mode set to row within an unbuffered logged database. The onconfig
file has
USELASTCOMMITTED 'COMMITTED READ' set. One user session has run the following:
begin work;
select * from state where code = "AK";
update state set sname = "ALASKA" where code = "AK";
The results from the SQL select statement run by user one was:
AK Alaska
Session two runs the following (session one is still connected):
set isolation to dirty read;
select * from state where code = "AK";
What will session two see when they run the above SQL statements?
A. AK and Alaska
B. AK and ALASKA
C. Error code 244 and isam 107.
D. The session waits until user one is finished processing.
Answer: B

IBM   000-918 pdf   000-918 dump

NO.9 Given the following message log information:
15.56:29 Physical Recovery Started at Page (1:1210).
15:56:29 Physical Recovery Complete: 147 Pages Examined, 10 Pages Restored.
15:56:29 Logical Recovery Started.
15:56:29 10 recovery worker threads will be started.
15:56:32 Logical Recovery has reached the transaction cleanup phase.
15:56:32 Logical Recovery Complete.
5 Committed, 2 Rolled Back, 0 Open, 0 Bad Locks
What would be the reason for the difference in 'Pages Examined' and 'Pages Restored' during physical
recovery?
A. The database server might physically log a page image multiple times between checkpoints.
B. The physical recovery restores only the first logged page image.
C. It is an expected behavior.
D. The physical log size is too large.
Answer:A

IBM   000-918   000-918시험문제   000-918

NO.10 Click the Exhibit button.
In the exhibit, how does an IDS database administrator or programmer ensure that only committed data
will be seen and that no locking errors will occur?
<e ip="918-a-3.jpg"></e>
A. Change user 1 isolation level to dirty read.
B. Change user 2 isolation level to dirty read.
C. Change user 1 isolation level to committed read last committed.
D. Change user 2 isolation level to committed read last committed.
Answer: D

IBM pdf   000-918   000-918   000-918   000-918

NO.11 Which two parameters influence the total size of the resident portion of shared memory? (Choose
two.)
A. RESIDENT
B. BUFFERS
C. LOCKS
D. SHMBASE
E. PHYSBUFF
Answer: CE

IBM덤프   000-918최신덤프   000-918   000-918

NO.12 Click the Exhibit button.
Given the sqexplain output in the exhibit, which SQL statement will make the est_rows column accurate?
<e ip="918-a-1.jpg"></e>
A. update statistics high for table
B. update statistics high for systables
C. update statistics high for table orders
D. update statistics high for table customer
Answer:A

IBM   000-918인증   000-918기출문제   000-918최신덤프

NO.13 A user wants to save SQL explain output to the file: /tmp/myexplain.out. Which syntax should be used?
A. set explain on file to /tmp/myexplain.out
B. set explain on file /tmp/myexplain.out
C. set explain file /tmp/myexplain.out
D. set explain file to /tmp/myexplain.out
Answer: D

IBM   000-918   000-918   000-918

NO.14 Which type of backup and restore (BAR) utility would be suited for restoring a single table from a level 0
backup to a specific point in time?
A. onbar
B. ontape
C. archecker
D. onarchive
Answer: C

IBM   000-918최신덤프   000-918   000-918시험문제

NO.15 Which memory area is used for log records for smart objects?
A. virtual portion of shared memory
B. logical log buffers
C. /tmp
D. DBSPACETEMP
Answer: B

IBM덤프   000-918   000-918기출문제   000-918   000-918시험문제

NO.16 An IDS server has its LRU_MIN_DIRTY set to 1 and its LRU_MAX_DIRTY set to 2. Occasionally the
checkpointblocks user transactions from doing updates to the database for too long. How should the
database administrator correct
this situation?
A. Set onconfig parameter AUTO_CKPT to 1 and follow any advice in online.log.
B. Increase the number of page cleaners (i.e. flushers).
C. Increase the buffer pool size.
D. Set the onconfig parameter RTO_SERVER_RESTART to "on".
Answer:A

IBM기출문제   000-918   000-918   000-918   000-918 dumps

NO.17 Which two protocols are used on a Linux platform for IPC connections? (Choose two.)
A. fast fiber
B. shared memory
C. stream pipe
D. named pipe
E. local loopback
Answer: BC

IBM   000-918   000-918자격증   000-918덤프

NO.18 When determining the physical log size, what should you consider?
A. RTO_SERVER_RESTART configuration parameter
B. DYNAMIC_LOGS configuration parameter
C. PHYSBUFF configuration parameter
D. LOGFILES configuration parameter
Answer:A

IBM   000-918자격증   000-918   000-918자료

NO.19 Both standard and temporary dbspaces are listed in the DBSPACETEMP configuration parameter or
environment variable. Which rule applies?
A. Sort, backup, implicit, and non-logging explicit temporary tables are created in temporary dbspaces if
adequate space
exists.
B. Backup, implicit, and non-logging explicit temporary tables are created in temporary dbspaces if
adequate space exists. Sort temporary tables are specified by the PSORT_DBTEMP environment
variable.
C. Sort, backup, implicit, and non-logging explicit temporary tables are created in all available dbspaces if
adequatespace exists.
D. Explicit temporary tables created without the WITH NO LOG option are created in the root dbspace.
Answer:A

IBM   000-918   000-918 dumps   000-918시험문제

NO.20 Which two statements are true for an hierarchical routing topology when setting up SQLHOSTS
server group?(Choose two.)
A. Root and nonroot servers only need to maintain their leaf node server groups.
B. Root and nonroot servers must each maintain all server groups within the enterprise.
C. Enterprise Replication will transmit exactly the SQLHOSTS information, there is no need to maintain
them.
D. Each leaf server must have SQLHOSTS information only for itself and its parent.
E. SQLHOSTS entries for nodes that do not directly connect are not required.
Answer: BD

IBM   000-918 dump   000-918

ITExamDump 의 IBM인증 000-918덤프는IBM인증 000-918시험에 도전장을 던진 분들이 신뢰할수 있는 든든한 길잡이 입니다. IBM인증 000-918시험대비 덤프뿐만아니라 다른 IT인증시험에 대비한 덤프자료도 적중율이 끝내줍니다. IBM인증 000-918시험이나 다른 IT인증자격증시험이나ITExamDump제품을 사용해보세요.투자한 덤프비용보다 훨씬 큰 이득을 보실수 있을것입니다.