지금21세기 IT업계가 주목 받고 있는 시대에 그 경쟁 또한 상상할만하죠, 당연히 it업계 중EMC E20-335인증시험도 아주 인기가 많은 시험입니다. 응시자는 매일매일 많아지고 있으며, 패스하는 분들은 관련it업계에서 많은 지식과 내공을 지닌 분들뿐입니다.
ITExamDump는EMC인증E20-335시험에 대하여 가이드를 해줄 수 있는 사이트입니다. ITExamDump는 여러분의 전업지식을 업그레이드시켜줄 수 잇고 또한 한번에EMC인증E20-335시험을 패스하도록 도와주는 사이트입니다. ITExamDump제공하는 자료들은 모두 it업계전문가들이 자신의 지식과 끈임없은 경헌등으로 만들어낸 퍼펙트 자료들입니다. 품질은 정확도 모두 보장되는 문제집입니다.EMC인증E20-335시험은 여러분이 it지식을 한층 업할수 잇는 시험이며 우리 또한 일년무료 업데이트서비스를 제공합니다.
여러분은EMC E20-335인증시험을 패스함으로 IT업계관련 직업을 찿고자하는 분들에게는 아주 큰 가산점이 될수 있으며, 성덩한 IT업계사업자와 한걸음 가까와 집니다.
ITExamDump 에서 제공해드리는 EMC E20-335덤프는 아주 우수한 IT인증덤프자료 사이트입니다. IT업계엘리트한 강사들이 퍼펙트한 EMC E20-335 덤프문제집을 제작하여 디테일한 시험문제와 답으로 여러분이 아주 간단히EMC E20-335시험을 패스할 수 있도록 최선을 다하고 있습니다.
시험 번호/코드: E20-335
시험 이름: EMC (Symmetrix Solutions Specialist Exam for Implementation Engineers)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 105 문항
업데이트: 2013-11-26
많은 분들이 고난의도인 IT관련인증시험을 응시하고 싶어 하는데 이런 시험은 많은 전문적인 IT관련지식이 필요합니다. 시험은 당연히 완전히 전문적인 IT관련지식을 터득하자만이 패스할 가능성이 높습니다. 하지만 지금은 많은 방법들로 여러분의 부족한 면을 보충해드릴 수 있으며 또 힘든 IT시험도 패스하실 수 있습니다. 혹은 여러분은 전문적인 IT관련지식을 터득하자들보다 더 간단히 더 빨리 시험을 패스하실 수 있습니다.
E20-335 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-335.html
NO.1 Which command is used to set or reset HBA port flags on Symmetric arrays running Enable 7.0
Enginuity 5874?
A. symcfg
B. symmask
C. symconfigure
D. symaccess
Answer: D
EMC E20-335자료 E20-335 E20-335덤프
NO.2 In symmetric V-max series array running Enginuity 5874, which device is used as a pass-through
device for Auto provisioning?
A. VDEV
B. VCM
C. ACLX
D. SFS
Answer: C
EMC자료 E20-335 dump E20-335 dump E20-335 E20-335인증
NO.3 Refer to the exhibit
What is the correct state for the Standard and Rl-BCV prior to issuing a symreplicate start command?
A. Synchronized
B. Suspended
C. Split
D. Write-Enable
Answer: C
EMC E20-335 E20-335최신덤프 E20-335
NO.4 What is recommended before creating a TimeFinder/Mirror replica?
A. Ensure that the production application using the source devices is shut down
B. Ensure that all writes from the production application using the source devices are paused!
C. Ensure that the BCVs are not being actively accessed
D. Set the BCVs to a Not Ready state
Answer: Chttp://www.scribd.com/doc/37352326/Emc-Study-2
NO.5 One of the requirements, during an Open Replicator implementation is that production application
should not be implemented by open Replication session. An analysis of the control Symmetrix showed
that FA ports are currently 70% utilized. How should pace and ceiling be configured?
A. Pace should be set to 0 and Ceiling should be left at the default
B. Pace should be left at the default and Ceiling set to 30
C. Pace should be left at the default and Ceiling set to 100
D. Pace should be set to 9 and Ceiling should be set to 70
Answer: B
EMC E20-335기출문제 E20-335자격증 E20-335 dumps
NO.6 Which file contains the parameter that can change the default behavior of SYMCLI operations, and
there control actions?
A. SYMCLI options File
B. SYMAPI Options File
C. SYMCLI Command File
D. SYMAPI Command File
Answer: B
EMC pdf E20-335인증 E20-335 E20-335기출문제 E20-335
NO.7 Open Replicator pull will be used to move data between a third party array and a Symmetrix V-Max
array.
What is recommended before starting the Open Replicator session?
A. Ensure that the remote devices are Host read/write enabled
B. Ensure that the control devices are Not Ready
C. Ensure that the remote devices are Host inaccessible
D. Ensure that the control devices are Write Disabled
Answer: C
EMC E20-335 E20-335최신덤프 E20-335
NO.8 Diagnostic messaging for the GNS daemon is written to which file?
A. /7SYMAPI/emc/storgnsd .log0
B. /SYMAPI/log/storgnsd.log0
C. /SYMAPl/usr/storgnsd log0
D. /SYMAPl/bin/storgnsd log0
Answer: B
EMC dumps E20-335 dump E20-335 E20-335
NO.9 How does Delta Set Extension help in an SRDF/A deployment?
A. Reduces RPO
B. Reduces the amount of required cache
C. Improves response time
D. Absorbs bursts of host writes
Answer: D
EMC E20-335 E20-335 pdf E20-335 E20-335 E20-335
NO.10 You have been asked to create a configuration for a single engine Symmetric V-Max array with 8 DAEs
and 64 drivers. They would like to have the data devices with RAID 5(7+1) protection.
What would be the largest number of members you would recommend for a stripped metavolume.?
A. 4
B. 16
C. 8
D. 32
Answer: B
EMC기출문제 E20-335 E20-335 E20-335자료 E20-335자료
NO.11 Refer to the exhibit.
A database server has its logs stored on a volume on the log source Symmetrix V-Max array and its data
stored on a volume on the data source Symmetrix V-Max array. Both source Symmetrix V-Max array
frames replicate data to the target Symmetrix V-Max array at the Remote site. There are two device
groups that have been defined:
One group for the data volume on the Symmetrix containing the data LUNs
One group for the log volume on the Symmetrix containing the log LUNS
What happens if the SRDF inks between the Symmetrix contain the data LUNs and the target Symmetrix
were to fail?
A. The R2 data in the database remains consistent because Enginuity Consistency Assist (RDFECAJ
technology would ensure data consistency).
B. The data in the database becomes inconsistent at the Remote site.
C. An SRDF failover would be initiated on all volumes and processing will automatically be switched over
to the Remote site
D. The R2 volumes in the Symmetrix V-Max containing the log LUNs would become write-disabled to the
database server
Answer: C
EMC E20-335자료 E20-335 E20-335최신덤프
NO.12 On the Symmetrix platform, which type of RAID protection ensures the best random write performance?
A. RAID 1
B. RAID S
C. RAID 6
D. RAID 5
Answer: A
EMC E20-335덤프 E20-335 E20-335기출문제 E20-335인증 E20-335 dump
NO.13 Where is the volume Logix Database maintained starting with DMX-3?
A. VCM gatekeeper
B. Symmetrix logical Volume
C. Symmetrix File System
D. VCM database.
Answer: C
EMC dump E20-335 E20-335 dumps E20-335
NO.14 An SRDF failover has been executed during the testing phase of an implementation. What is the
expected status of the R1 and R2 devices after performing SRDF failover operation?
A. R1 and R2 Not Ready
B. R1 Wnte Disabled; R2 Read/Wnte
C. R1 Read/Wnte, R2 Read/Wnte
D. R1 Read/Wnte. R2 Wnte Disabled
Answer: Bhttp://www.scribd.com/doc/29541661/Srdf-Operations-white-Paper
NO.15 What is required to ensure the integrity of data on the R2 volume during a SRDF fallback operation?
A. Remove entries from the file system table
B. Stop any applications that are accessing the R2 volume
C. Disable journaling on the file system
D. Suspend the RDF link
Answer: B
EMC E20-335시험문제 E20-335 E20-335자료
ITexamdump의 HP0-Y46덤프의 VCE테스트프로그램과 000-619덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 VCP-510시험에 대비한 고품질 덤프와 HP2-T23시험 최신버전덤프를 제공해드립니다. 최고품질 HP0-J62시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기