IT인증시험덤프자료를 제공해드리는 사이트는 너무나도 많습니다. 그중에서 대부분 분들이ITExamDump제품에 많은 관심과 사랑을 주고 계시는데 그 원인은 무엇일가요?바로ITExamDump에서 제공해드리는 덤프자료 품질이 제일 좋고 업데이트가 제일 빠르고 가격이 제일 저렴하고 구매후 서비스가 제일 훌륭하다는 점에 있습니다. ITExamDump 표 Microsoft인증070-573-Csharp덤프를 공부하시면 시험보는데 자신감이 생기고 시험불합격에 대한 우려도 줄어들것입니다.
IT업계의 치열한 경쟁속에 살아 남으려면 자신의 능력을 증명하여야 합니다. 국제승인을 받는 IT인증자격증을 많이 취득하시면 취직이든 승진이든 이직이든 모든 면에서 이득을 볼수 있습니다. 최근 Microsoft인증 070-573-Csharp시험에 도전하는 분이 많은데 ITExamDump에서 Microsoft인증 070-573-Csharp시험에 대비한 가장 최신버전 덤프공부가이드를 제공해드립니다.
어떻게Microsoft인증070-573-Csharp시험을 패스하느냐 에는 여러 가지 방법이 있습니다. 하지만 여러분의 선택에 따라 보장도 또한 틀립니다. 우리ITExamDump 에서는 아주 완벽한 학습가이드를 제공하며,Microsoft인증070-573-Csharp시험은 아주 간편하게 패스하실 수 있습니다. ITExamDump에서 제공되는 문제와 답은 모두 실제Microsoft인증070-573-Csharp시험에서나 오는 문제들입니다. 일종의 기출문제입니다.때문에 우리ITExamDump덤프의 보장 도와 정확도는 안심하셔도 좋습니다.무조건Microsoft인증070-573-Csharp시험을 통과하게 만듭니다.우리ITExamDump또한 끈임 없는 덤프갱신으로 페펙트한Microsoft인증070-573-Csharp시험자료를 여러분들한테 선사하겠습니다.
ITExamDump는 우수한 IT인증시험 공부가이드를 제공하는 전문 사이트인데 업계에서 높은 인지도를 가지고 있습니다. ITExamDump에서는 IT인증시험에 대비한 모든 덤프자료를 제공해드립니다. Microsoft인증 070-573-Csharp시험을 준비하고 계시는 분들은ITExamDump의Microsoft인증 070-573-Csharp덤프로 시험준비를 해보세요. 놀라운 고득점으로 시험패스를 도와드릴것입니다.시험에서 불합격하면 덤프비용 전액환불을 약속드립니다.
시험 번호/코드: 070-573-Csharp
시험 이름: Microsoft (TS: Microsoft SharePoint 2010, Application Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 150 문항
업데이트: 2014-01-16
ITExamDump에는 전문적인 업계인사들이Microsoft 070-573-Csharp시험문제와 답에 대하여 연구하여, 시험준비중인 여러분들한테 유용하고 필요한 시험가이드를 제공합니다. 만약ITExamDump의 제품을 구매하려면, 우리ITExamDump에서는 아주 디테일 한 설명과 최신버전 최고품질의자료를 즉적중율이 높은 문제와 답을제공합니다.Microsoft 070-573-Csharp자료는 충분한 시험대비자료가 될 것입니다. 안심하시고 ITExamDump가 제공하는 상품을 사용하시고, 100%통과 율을 확신합니다.
070-573-Csharp 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-573-Csharp.html
NO.1 You are creating an application.
You develop a custom control that renders a contextual tab.
The control contains the following code segment. (Line numbers are included for reference only.)
01protected?override?void?OnPreRender(EventArgs?e)
02 {
03 SPRibbon?curRibbon?=?SPRibbon.GetCurrent(this.Page);
04
05 curRibbon.MakeContextualGroupInitiallyVisible
("SP.Ribbon.ContextualGroup",?string.Empty);
06 base.OnPreRender(e);
07 }You need to ensure that when the custom control is rendered, the custom contextual tab appears in
the Ribbon.
Which code segment should you add at line 04?
A. curRibbon.Enabled?=?true;
B. curRibbon.MakeRTEContextualTabsAvailable("SP.Ribbon.ContextualTab");
C. curRibbon.MakeTabAvailable("SP.Ribbon.ContextualTab");
D. curRibbon.Visible?=?true;
Answer: C
Microsoft 070-573-Csharp최신덤프 070-573-Csharp 070-573-Csharp인증 070-573-Csharp pdf
NO.2 You create a Web Part that takes three values from three text boxes and creates a new SharePoint site
when you click a button named CreateNewSite.
The Web Part contains the following code segment.
protected?void?CreateNewSite_Click(object?sender,?EventArgs?e)
{
SPSite site = SPContext.Current.Site;
SPWeb?web?=?site.AllWebs.Add(SiteNameTextBox.Text,?SiteTitleTextBox.Text,
SiteDescriptionTextBox.Text,?0,?SPWebTemplate.WebTemplateSTS,?false,?false);
}
You test the Web Part and it works properly. When another user attempts to use the Web Part to create a
new site, he receives the following error message: Error: Access Denied.
You need to ensure that users can use the Web Part to create new sites.
What should you do?
A. Add web.Update() after the code segment.
B. Add web.ValidatesFormDigest() after the code segment.
C. Run the code segment inside a SPSecurity.RunWithElevatedPrivileges delegate.
D. Add the following code after the code segment.
SPUser?currentUser?=?web.CurrentUser;
web.Users.Add(currentUser.LoginName,?currentUser.Email,?currentUser.Name,? );
Answer: C
Microsoft 070-573-Csharp인증 070-573-Csharp기출문제 070-573-Csharp dumps
NO.3 You create a Web Part that contains the following code segment. (Line numbers are included for
reference only.)
01public?class?WebPart1?:?WebPart
02 {
03 public?WebPart1(){}
04?
05 protected?override?void?CreateChildControls()
06 {
07 Button?clickButton?=?new?Button();
08?
09 base.CreateChildControls();
10 }
11?
NO.4 You plan to develop a Web Part that displays a SharePoint list. The Web Part will verify the list
permissions when users access by using the web.CurrentUser.DoesUserHavePermissions method.
You need to ensure that when users do not have permissions to the list, the Web Part displays the
company ¯ s l ogo
Which code segment should you add to the Web Part?
A. RunWithElevatedPrivileges
B. web.AllowUnsafeUpdates=?true;
C. web.CurrentUser.RequireRequestToken?=?false;
D. web.ValidateFormDigest();
Answer: A
Microsoft 070-573-Csharp 070-573-Csharp
NO.5 You have a SharePoint list named Announcements.
You have an event receiver that contains the following code segment. (Line numbers are included for
reference only.)
01public?override?void?ItemAdding(SPItemEventProperties?properties)
02 {
03 if?(properties.ListItem["Title"].ToString().Contains("secret"))
04?
05}
You need to prevent users from adding items that contain the word secret
in the title to the list.
Which code segment should you add at line 04?
A. properties.Cancel?=?false;
B. properties.Cancel?=?true;
C. properties.Status = SPEventReceiverStatus.Continue;
D. return;
Answer: B
Microsoft pdf 070-573-Csharp기출문제 070-573-Csharp 070-573-Csharp
NO.6 }
NO.7 You create a Feature named Feature1. Feature1 is activated in a SharePoint site.
You create a Web Part that contains the following code.
SPSite?site?=?new?SPSite("http://intranet/site1");
SPWeb web?=?site.OpenWeb();
SPFeatureDefinition feature?=
SPFarm.Local.FeatureDefinitions["Feature1"];
You need to modify the Web Part to activate Feature1 in Site1 only.
Which code segment should you add to the Web Part?
A. site.Features.Add(feature.Id);
B. site.WebApplication.WebService.Features.Add(feature.Id);
C. web.Features.Add(feature.Id);
D. web.Site.WebApplication.WebService.Features.Add(feature.Id);
Answer: A
Microsoft 070-573-Csharp pdf 070-573-Csharp
NO.8 You have the following event receiver. (Line numbers are included for reference only.)
01public?override?void?FieldDeleting (SPListEventProperties?properties)
02 {
03 base.FieldDeleting(properties);
04?
05 if?(properties.FieldName?==?"Status")
06 {
07?
08?
09 }
10 }
You need to cancel the operation and redirect the user to a custom error page if the name of the deleted
field is Status.
Which code segments should you add at lines 07 and 08?
A. 07properties.ErrorMessage?=?"<Redirect?URL?=? ® / _ l ayou t s / cus t o m E rr o r Page . asp¡¯ />
08properties.Cancel?=?true;
B. 07properties.RedirectUrl?=?"/_layouts/customErrorPage.aspx";
08properties.Cancel?=?true;
C. 07properties.Status?=?SPEventReceiverStatus.CancelWithRedirectUrl;
08properties.ErrorMessage?=?"<Redirect?URL?=? ® / _ l ayou t s / cus t o m E rr o r Page . asp¡¯ />
D. 07properties.Status?=?SPEventReceiverStatus.CancelWithRedirectUrl;
08properties.RedirectUrl?=?"/_layouts/customErrorPage.aspx";
Answer: D
Microsoft 070-573-Csharp dump 070-573-Csharp
NO.9 You have a SharePoint farm that has more than 100 custom Features.
You upgrade several Features in the farm.
You need to ensure that the site collection uses the most up-to-date versions of the Features. Only
Features that require an upgrade must be evaluated.
Which code segment should you use?
A. SPFeatureQueryResultCollection?queryResults?=?myWebService.QueryFeatures
(SPFeatureScope.Site,?true);
IEnumerator<SPFeature>?featureEnumerator?=?queryResults.GetEnumerator();
while?(featureEnumerator.MoveNext())
{
SPFeature?feature?=?featureEnumerator.Current;
feature.Upgrade(false);
}
B. SPFeatureQueryResultCollection?queryResults?=?myWebService.QueryFeatures
(SPFeatureScope.Web,?true);
IEnumerator<SPFeature>?featureEnumerator?=?queryResults.GetEnumerator();
while?(featureEnumerator.MoveNext())
{
SPFeature?feature?=?featureEnumerator.Current;
feature.Upgrade(false);
}
C. SPSite?site?=?SPContext.Current.Site;
SPFeatureCollection?allFeatures?=?site.Features;
foreach?(SPFeature?currentFeature?in?allFeatures)
{
currentFeature.Upgrade(true);
}
D. SPWeb?web?=?SPContext.Current.Web;
SPFeatureCollection?allFeatures?=?web.Features;
foreach?(SPFeature?currentFeature?in?allFeatures)
{
currentFeature.Upgrade(true);
}
Answer: A
Microsoft 070-573-Csharp 070-573-Csharp 070-573-Csharp시험문제
NO.10 You need to create a Web Part that hides the out-of-the-box Ribbon on the current page.
Which code segment should you include in the Web Part?
A. SPRibbon.GetCurrent(this.Page).CommandUIVisible?=?false;
B. SPRibbon.GetCurrent(this.Page).Dispose();
C. this.Page.FindControl("SPRibbon").Dispose();
D. this.Page.FindControl("SPRibbon").Visible?=?false;
Answer: A
Microsoft자격증 070-573-Csharp인증 070-573-Csharp인증 070-573-Csharp인증
NO.11 You are creating a Web Part. The Web Part will be used in a SharePoint subsite that has the URL
http://www.contoso.com/hr.
You need to ensure that the Web Part activates a Feature in the subsite without causing a memory leak.
Which code segment should you use?
A. SPFeatureCollection?featuresCollect?=?SPContext.Current.SiteFeatures;
featureCollect.Add(new?Guid("xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"),?true);
B. SPFeatureCollection?featuresCollect?=?SPContext.Current.WebFeatures;
featureCollect.Add(new?Guid("xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"),?true);
C. SPSite?web?=?new?SPSite("http://www.contoso.com/hr");
SPFeatureCollection?featureCollect?=?web.Features;
featureCollect.Add(new?Guid("xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"),?true);
D. SPWeb?web?=?new?SPSite("http://www.contoso.com/hr").OpenWeb();
SPFeatureCollection?featureCollect?=?web.Features;
featureCollect.Add(new?Guid("xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"),?true);
Answer: B
Microsoft자료 070-573-Csharp자격증 070-573-Csharp 070-573-Csharp최신덤프
NO.12 protected?override?void?RenderContents(HtmlTextWriter?writer)
NO.13 base.RenderContents(writer);
NO.14 {
NO.15 You have a SharePoint site collection that contains 100 subsites.
You plan to create a Web Part. The Web Part will be deployed to each subsite.
You need to ensure that the Web Part retrieves all of the files in the root directory of the current subsite.
You write the following code segment. (Line numbers are included for reference only.)
01SPSite?site?=?SPContext.Current.Site;
02SPWeb?web?=?SPContext.Current.Web;
03?Which code segment should you add at line 03?
A. site.AllWebs[1].Files
B. Site.RootWeb.Lists[0].Items
C. web.Files
D. web.RootFolder.SubFolders[0].Files
Answer: C
Microsoft pdf 070-573-Csharp 070-573-Csharp인증
NO.16 You have a custom theme named MyTheme. The theme is defined in a file named MyTheme.thmx.
You have a console application that contains the following code segment. (Line numbers are included for
reference only.)
01using?(SPSite?site?=?new?SPSite( http://intranet ))
02{
03 SPWeb?web?=?site.OpenWeb();
04
05}
You need to programmatically apply the theme to a SharePoint site.
Which code segment should you add to the console application?
A. ThmxTheme.SetThemeUrlForWeb(web, "/_catalogs/theme/MyTheme.thmx", false);
B. web.AlternateCssUrl?=? /_themes/MyTheme ;
C. web.ApplyWebTemplate( MyTheme.thmx );
D. web.ThemedCssFolderUrl?=? /_themes/MyTheme ;
Answer: A
Microsoft 070-573-Csharp덤프 070-573-Csharp자료 070-573-Csharp 070-573-Csharp
NO.17 You are creating an event receiver. The event receiver will have a field named Title and a field named
Priority.
You write the following code segment for the event receiver. (Line numbers are included for reference
only.)
01public?override?void?ItemUpdating(SPItemEventProperties?prop)
02{
03 base.ItemUpdating(prop);
04?
05?
06}
You need to ensure that when the Title field is changed to include the word IMPORTANT, the Priority field
is set to URGENT.
Which code segments should you add at lines 04 and 05?
A. 04if(prop.AfterProperties["vti_title"].ToString().Contains("IMPORTANT"))
05prop.AfterProperties["Priority"]?=?"URGENT";
B. 04if(prop.AfterProperties["vti_title"].ToString().Contains("IMPORTANT"))
05prop.ListItem["Priority"]?=?"URGENT";
C. 04if(prop.BeforeProperties["vti_title"].ToString().Contains("IMPORTANT"))
05prop.AfterProperties["Priority"]?=?"URGENT";
D. 04if(prop.ListItem["Title"].ToString().Contains("IMPORTANT"))
05prop.AfterProperties["Priority"]?=?"URGENT";
Answer: A
Microsoft pdf 070-573-Csharp dump 070-573-Csharp
NO.18 You have a SharePoint site that has the URL http://contoso.com/hr.
You are creating a new Web Part.
You need to create a reference to the current subsite without having to dispose of any returned objects.
Which code segment should you use?
A. SPSite?siteCollection?=?new?SPSite( http://www.contoso.com );
SPWebCollection?site?=?siteCollection.AllWebs;
B. SPSite?siteCollection?=?new?SPSite( http://www.contoso.com );
SPWeb?site?=?siteCollection.RootWeb;
C. SPSite?site?=?SPContext.Current.Site;
D. SPWeb?site?=?SPContext.Current.Web;
Answer: D
Microsoft 070-573-Csharp최신덤프 070-573-Csharp
NO.19
NO.20 }
You discover that the clickButton button does not appear.
You need to ensure that clickButton appears.
What should you do?
A. Delete line 09.
B. Move line 07 to line 14.
C. Add the following line of code at line 08.
Controls.Add(clickButton);
D. Add the following line of code at line 08.
clickButton.Page?=?this.Page;
Answer: C
Microsoft 070-573-Csharp자료 070-573-Csharp pdf
12. You plan to create two Web Parts named Products and ProductDetails.
You create an interface that contains the following code segment.
Public?interface?Interface1
{
String?Productid?{?get;?}
}
You need to ensure that the Products Web Part sends Productid to the ProductDetails Web Part. You
must achieve this goal by using the ASP.NET Web Part connection framework.
What should you do?
A. Implement Interface1 in the Products Web Part.
B. Implement Interface1 in the ProductDetails Web Part.
C. Add a private set-accessor-declaration to the Productid property.
D. Add a protected set-accessor-declaration to the Productid property.
Answer: A
Microsoft덤프 070-573-Csharp 070-573-Csharp덤프 070-573-Csharp
13. You plan to create one provider Web Part and two consumer Web Parts.
You need to ensure that the consumer Web Parts can receive data from the provider Web Part.
You create an interface that contains the following code segment.
public interface Interface1
{
string Parameter1 { get; }
}
What should you do next?
A. Implement Interface1 in the provider Web Part.
B. Implement IWebPartField in the provider Web Part.
C. Create a set accessor for Parameter1.
D. Create a second interface and use it to communicate with the provider Web Part.
Answer: D
Microsoft 070-573-Csharp 070-573-Csharp
14. You create a Web Part named WP1.
You need to ensure that the name of the Web Part displays as Corporate in SharePoint.
What should you do?
A. Rename WP1.webpart as Corporate.webpart.
B. In WP1.webpart, change the Title property to Corporate.
C. In the Elements.xml file, change the Name property of the <File> element to Corporate.
D. In the constructor of WP1.cs, add the following line of code.
Page.Title?=?"Corporate";
Answer: B
Microsoft 070-573-Csharp 070-573-Csharp
15. You create a Web Part that contains the following logging code. (Line numbers are included for
reference only.)
01SPWeb web = SPContext.Current.Web;
02try
03{
04
05}
06catch(Exception?ex)?
07{
08?
09 System.Diagnostics.EventLog.WriteEntry("WebPart?Name",
"Exception?Information:?"?+?ex.Message,?EventLogEntryType.Error);
10}
You discover that line 09 causes an error.
You need to resolve the error.
What should you do?
A. Run the code segment at line 09 inside a RunWithElevatedPrivileges delegate.
B. Add the following code at line 08.
if?(web.CurrentUser.IsSiteAuditor?==?false)
C. Add the following code at line 08.
if?(web.CurrentUser.IsSiteAdmin?==?false)
D. Change line 09 to the following code segment.
System.Diagnostics.EventLog.WriteEntry("WebPart?Name",?"Exception?Information",?EventLogEntryTy
pe.Error);
Answer: A
Microsoft시험문제 070-573-Csharp dump 070-573-Csharp 070-573-Csharp인증
16. You create a Web Part that calls a function named longCall.
You discover that longCall takes a long time to execute.
You need to display in the Developer Dashboard how long it takes to execute longCall.
Which code segment should you use?
A. DateTime?startTime?=?DateTime.Now;
longCall();
Trace.Write("Long?Call?"?+?DateTime.Now.Subtract(startTime).Seconds);
B. DateTime?startTime?=?DateTime.Now;
longCall();
Trace.TraceWarning
("Long?Call?"?+?DateTime.Now.Subtract(startTime).Seconds);
C. Monitor.Enter("Long?Call");
{
longCall();
}
Monitor.Exit("Long?Call");
D. using?(SPMonitoredScope?monitoredScope?=?
new?SPMonitoredScope("Long?Call"))?
{
longCall();
}
Answer: D
Microsoft 070-573-Csharp인증 070-573-Csharp 070-573-Csharp최신덤프 070-573-Csharp
17. You plan to activate the Developer Dashboard.
You create a command line application that contains the following code segment. (Line numbers are
included for reference only.)
01SPWebService?cs?=?SPWebService.ContentService;
02cs.DeveloperDashboardSettings.DisplayLevel?=?SPDeveloperDashboardLevel.On;
03?
You execute the application and discover that the Developer Dashboard fails to appear.
You need to ensure that the application activates the Developer Dashboard.
What should you do?
A. Add the following line of code at line 03.
cs.Update();
B. Add the following line of code at line 03.
cs.DeveloperDashboardSettings.Update();
C. Change line 02 to the following code segment.
cs.DeveloperDashboardSettings.DisplayLevel?=?SPDeveloperDashboardLevel.Off;
D. Change line 02 to the following code segment.
cs.DeveloperDashboardSettings.DisplayLevel?=?SPDeveloperDashboardLevel.OnDemand;
Answer: B
Microsoft자격증 070-573-Csharp인증 070-573-Csharp시험문제
ITexamdump의 70-461덤프의 VCE테스트프로그램과 312-50v8덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-465시험에 대비한 고품질 덤프와 70-464시험 최신버전덤프를 제공해드립니다. 최고품질 LOT-405시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기