70-536 덤프 Microsoft 인증

ITExamDump는 여러분이 빠른 시일 내에Microsoft 70-536인증시험을 효과적으로 터득할 수 있는 사이트입니다.Microsoft 70-536덤프는 보장하는 덤프입니다. 만약 시험에서 떨어지셨다고 하면 우리는 무조건 덤프전액 환불을 약속 드립니다. 우리ITExamDump 사이트에서Microsoft 70-536관련자료의 일부분 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump의Microsoft 70-536덤프로 자신 있는 시험준비를 하세요.

ITExamDump의 Microsoft인증70-536시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의Microsoft인증70-536시험덤프자료를 제공받을수 있습니다.

시험 번호/코드: 70-536

시험 이름: Microsoft (TS:MS.NET Framework 2.0-Application Develop Foundation)

ITExamDump는 저희 제품을 구매한 분들이 100%통과율을 보장해드리도록 최선을 다하고 있습니다. ITExamDump를 선택한것은 시험패스와 자격증취득을 예약한것과 같습니다. ITExamDump의 믿음직한 Microsoft인증 70-536덤프를 공부해보세요.

Microsoft인증 70-536시험은 멋진 IT전문가로 거듭나는 길에서 반드시 넘어야할 높은 산입니다. Microsoft인증 70-536시험문제패스가 어렵다한들ITExamDump덤프만 있으면 패스도 간단한 일로 변경됩니다. ITExamDump의Microsoft인증 70-536덤프는 100%시험패스율을 보장합니다. Microsoft인증 70-536시험문제가 업데이트되면Microsoft인증 70-536덤프도 바로 업데이트하여 무료 업데이트서비스를 제공해드리기에 덤프유효기간을 연장해는것으로 됩니다.

70-536 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-536.html

NO.1 You are writing a custom dictionary. The custom-dictionary class is named MyDictionary. You need to
ensure that the dictionary is type safe. Which code segment should you use?
A. class MyDictionary : Dictionary<string, string>
B. class MyDictionary : HashTable
C. class MyDictionary : IDictionary
D. class MyDictionary { ... }
Dictionary<string, string> t = new Dictionary<string, string>(); MyDictionary dictionary = (MyDictionary)t;
Answer: A

Microsoft   70-536덤프   70-536   70-536 dumps   70-536

NO.2 You are creating a class that uses unmanaged resources. This class maintains references to managed
resources on other objects. You need to ensure that users of this class can explicitly release resources
when the class instance ceases to be needed. Which three actions should you perform? (Each correct
answer presents part of the solution. Choose three.)
A. Define the class such that it inherits from the WeakReference class.
B. Define the class such that it implements the IDisposable interface.
C. Create a class destructor that calls methods on other objects to release the managed resources.
D. Create a class destructor that releases the unmanaged resources.
E. Create a Dispose method that calls System.GC.Collect to force garbage collection.
F. Create a Dispose method that releases unmanaged resources and calls methods on other objects to
release the managed resources.
Answer: BDF

Microsoft   70-536최신덤프   70-536자료

NO.3 You create an application to send a message by e-mail. An SMTP server is available on the local subnet.
The SMTP server is named smtp.contoso.com.
To test the application, you use a source address, me@contoso.com, and a target address,
you@contoso.com.
You need to transmit the e-mail message.
Which code segment should you use?
A. MailAddress addrFrom =
new MailAddress("me@contoso.com", "Me");
MailAddress addrTo =
new MailAddress("you@contoso.com", "You");
MailMessage message = new MailMessage(addrFrom, addrTo); message.Subject = "Greetings!";
message.Body = "Test";
SocketInformation info = new SocketInformation();
Socket client = new Socket(info);
System.Text.ASCIIEncoding enc =
new System.Text.ASCIIEncoding();
byte[] msgBytes = enc.GetBytes(message.ToString());
client.Send(msgBytes);
B. MailAddress addrFrom = new MailAddress("me@contoso.com"); MailAddress addrTo = new
MailAddress("you@contoso.com"); MailMessage message = new MailMessage(addrFrom, addrTo);
message.Subject = "Greetings!";
message.Body = "Test";
SmtpClient client = new SmtpClient("smtp.contoso.com"); client.Send(message);
C. string strSmtpClient = "smtp.contoso.com";
string strFrom = "me@contoso.com";
string strTo = "you@contoso.com";
string strSubject = "Greetings!";
string strBody = "Test";
MailMessage msg =
"A Composite Solution With Just One Click" - Certification Guaranteed 7 Microsoft 70-536 Exam
new MailMessage(strFrom, strTo, strSubject, strSmtpClient);
D. MailAddress addrFrom =
new MailAddress("me@contoso.com", "Me");
MailAddress addrTo =
new MailAddress("you@contoso.com", "You");
MailMessage message = new MailMessage(addrFrom, addrTo); message.Subject = "Greetings!";
message.Body = "Test";
message.Dispose();
Answer: B

Microsoft   70-536덤프   70-536최신덤프   70-536최신덤프   70-536시험문제

NO.4 You need to create a dynamic assembly named MyAssembly. You also need to save the assembly to
disk.
Which code segment should you use?
A. AssemblyName myAssemblyName =
new AssemblyName();
AssemblyBuilder myAssemblyBuilder =
AppDomain.CurrentDomain.DefineDynamicAssembly
(myAssemblyName, AssemblyBuilderAccess.RunAndSave);
myAssemblyBuilder.Save("MyAssembly.dll");
B. AssemblyName myAssemblyName =
new AssemblyName();
myAssemblyName.Name = "MyAssembly";
AssemblyBuilder myAssemblyBuilder =
AppDomain.CurrentDomain.DefineDynamicAssembly
(myAssemblyName, AssemblyBuilderAccess.Save);
myAssemblyBuilder.Save("MyAssembly.dll");
C. AssemblyName myAssemblyName =
new AssemblyName("MyAssembly");
AssemblyBuilder myAssemblyBuilder =
AppDomain.CurrentDomain.DefineDynamicAssembly
(myAssemblyName, AssemblyBuilderAccess.Save);
myAssemblyBuilder.Save("c:\\MyAssembly.dll");
D. AssemblyName myAssemblyName =
new AssemblyName();
myAssemblyName.Name = "MyAssembly";
AssemblyBuilder myAssemblyBuilder =
AppDomain.CurrentDomain.DefineDynamicAssembly
(myAssemblyName, AssemblyBuilderAccess.Run);
myAssemblyBuilder.Save("MyAssembly.dll");
Answer: B

Microsoft기출문제   70-536 pdf   70-536

NO.5 You are testing a newly developed method named PersistToDB. This method accepts a parameter of
type EventLogEntry. This method does not return a value. You need to create a code segment that helps
you to test the method. The code segment must read entries from the application log of local computers
and then pass the entries on to the PersistToDB method. The code block must pass only events of type
Error or Warning from the source MySource to the PersistToDB method.
Which code segment should you use?
A. EventLog myLog = new EventLog("Application", ".");
foreach (EventLogEntry entry in myLog.Entries)
{
if (entry.Source == "MySource")
{
PersistToDB(entry);
}
}
B. EventLog myLog = new EventLog("Application", ".");
myLog.Source = "MySource";
foreach (EventLogEntry entry in myLog.Entries)
{
if (entry.EntryType == (EventLogEntryType.Error & EventLogEntryType.Warning)) {
PersistToDB(entry);
}
}
C. EventLog myLog = new EventLog("Application", ".");
foreach (EventLogEntry entry in myLog.Entries)
{
if (entry.Source == "MySource")
{
if (entry.EntryType == EventLogEntryType.Error || entry.EntryType == EventLogEntryType.Warning)
{
PersistToDB(entry);
}
}
}
D. EventLog myLog = new EventLog("Application", ".");
myLog.Source = "MySource";
foreach (EventLogEntry entry in myLog.Entries)
{
if (entry.EntryType == EventLogEntryType.Error || entry.EntryType == EventLogEntryType.Warning)
{
PersistToDB(entry);
}
}
Answer: C

Microsoft dumps   70-536   70-536최신덤프   70-536

NO.6 You write the following code:
public delegate void FaxDocs(object sender, FaxArgs args);
You need to create an event that will invoke FaxDocs. Which code segment should you use?
A. public static event FaxDocs Fax;
B. public static event Fax FaxDocs;
C. public class FaxArgs : EventArgs{
private string coverPageInfo;
public FaxArgs(string coverInfo)
{
this.coverPageInfo = coverPageInfo;
}
public string CoverPageInformation
{
get { return this.coverPageInfo; }
}
}
D. public class FaxArgs : EventArgs
{
private string coverPageInfo;
public string CoverPageInformation
{
get { return this.coverPageInfo; }
}
}
Answer: A

Microsoft   70-536자료   70-536

NO.7 You are developing a custom event handler to automatically print all open documents. The event
handler helps specify the number of copies to be printed. You need to develop a custom event arguments
class to pass as a parameter to the event handler.
Which code segment should you use?
A. public class PrintingArgs
{
private int copies;
public PrintingArgs(int numberOfCopies)
{
this.copies = numberOfCopies;
}
public int Copies
{
get { return this.copies; }
}
}
B. public class PrintingArgs : EventArgs
{
private int copies;
public PrintingArgs(int numberOfCopies)
{
this.copies = numberOfCopies;
}
public int Copies
{
get { return this.copies; }
}
}
C. public class PrintingArgs
{
private EventArgs eventArgs;
public PrintingArgs(EventArgs ea)
{
this.eventArgs = ea;
}
public EventArgs Args
{
get { return eventArgs; }
}
}
D. public class PrintingArgs : EventArgs
{
private int copies;
}
Answer: B

Microsoft dumps   70-536 pdf   70-536   70-536시험문제   70-536

NO.8 You are developing an application that receives events asynchronously. You create a WqlEventQuery
instance to specify the events and event conditions to which the application must respond. You also
create a ManagementEventWatcher instance to subscribe to events matching the query. You need to
identify the other actions you must perform before the application can receive events asynchronously.
Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Start listening for events by calling the Start method of the ManagementEventWatcher.
B. Set up a listener for events by using the EventArrived event of the ManagementEventWatcher.
C. Use the WaitForNextEvent method of the ManagementEventWatcher to wait for the events.
D. Create an event handler class that has a method that receives an ObjectReadyEventArgs parameter.
E. Set up a listener for events by using the Stopped event of the ManagementEventWatcher.
Answer: AB

Microsoft   70-536자료   70-536 dumps

NO.9 You are working on a debug build of an application. You need to find the line of code that caused an
exception to be thrown. Which property of the Exception class should you use to achieve this goal?
A. Data
B. Message
C. StackTrace
D. Source
Answer: C

Microsoft자료   70-536 dump   70-536   70-536   70-536 dumps

NO.10 You are writing an application that uses SOAP to exchange data with other applications. You use a
Department class that inherits from ArrayList to send objects to another application. The Department
object is named dept.
You need to ensure that the application serializes the Department object for transport by using SOAP.
Which code should you use?
A. SoapFormatter formatter = new SoapFormatter();
byte[] buffer = new byte[dept.Capacity];
MemoryStream stream = new MemoryStream(buffer);
foreach (object o in dept)
{
formatter.Serialize(stream, o);
}
B. SoapFormatter formatter = new SoapFormatter();
byte[] buffer = new byte[dept.Capacity];
MemoryStream stream = new MemoryStream(buffer);
formatter.Serialize(stream, dept);
C. SoapFormatter formatter = new SoapFormatter();
MemoryStream stream = new MemoryStream();
foreach (object o in dept)
{
Formatter.Serialize(stream, o);
}
D. SoapFormatter formatter = new SoapFormatter();
MemoryStream stream = new MemoryStream();
formatter.Serialize(stream, dept);
Answer: D

Microsoft기출문제   70-536   70-536시험문제

NO.11 You are developing an application to perform mathematical calculations. You develop a class named
CalculationValues. You write a procedure named PerformCalculation that operates on an instance of the
class.
You need to ensure that the user interface of the application continues to respond while calculations are
being performed. You need to write a code segment that calls the Perform Calculation procedure to
achieve this goal.
Which code segment should you use?
A. public ref class CalculationValues {...};
public ref class Calculator {
public :
void PerformCalculation(Object= values) {}
};
public ref class ThreadTest{
private :
void DoWork (){
CalculationValues= myValues = gcnew CalculationValues(); Calculator = calc = gcnew Calculator();
Thread= newThread = gcnew Thread(
gcnew ParameterizedThreadStart(calc,
&Calculator::PerformCalculation));
newThread->Start(myValues);
}
};
B. public ref class CalculationValues {...};
public ref class Calculator {
public :
void PerformCalculation() {}
};
public ref class ThreadTest{
private :
void DoWork (){
CalculationValues= myValues = gcnew CalculationValues(); Calculator = calc = gcnew Calculator();
ThreadStart= delStart = gcnew
ThreadStart(calc, &Calculator::PerformCalculation);
Thread= newThread = gcnew Thread(delStart);
if (newThread->IsAlive) {
newThread->Start(myValues);
}
}
};
C. public ref class CalculationValues {...};
public ref class Calculator {
public :
void PerformCalculation(CalculationValues= values) {} };
public ref class ThreadTest{
private :
void DoWork (){
CalculationValues= myValues = gcnew CalculationValues(); Calculator = calc = gcnew Calculator();
Application::DoEvents();
calc->PerformCalculation(myValues);
Application::DoEvents();
}
};
D. public ref class CalculationValues {...};
public ref class Calculator {
public :
void PerformCalculation() {}
};
public ref class ThreadTest{
private :
void DoWork (){
CalculationValues= myValues = gcnew CalculationValues(); Calculator = calc = gcnew Calculator();
Thread= newThread = gcnew Thread(
gcnew ThreadStart(calc, &Calculator::PerformCalculation)); newThread->Start(myValues);
}
};
Answer: A

Microsoft   70-536   70-536   70-536   70-536최신덤프

NO.12 You write the following code segment to call a function from the Win32 Application Programming
Interface (API) by using platform invoke.
string personName = "N?el";
string msg = "Welcome" + personName + "to club"!";
bool rc = User32API.MessageBox(0, msg, personName, 0);
You need to define a method prototype that can best marshal the string data.
Which code segment should you use?
A. [DllImport("user32", CharSet = CharSet.Ansi)]
public static extern bool MessageBox(int hWnd, String text, String caption, uint type);
}
B. [DllImport("user32", EntryPoint = "MessageBoxA", CharSet = CharSet.Ansi)] public static extern bool
MessageBox(int hWnd, [MarshalAs(UnmanagedType.
LPWStr)]
String text, [MarshalAs(UnmanagedType.LPWStr)]String caption, uint type); }
C. [DllImport("user32", CharSet = CharSet.Unicode)]
public static extern bool MessageBox(int hWnd, String text, String caption, uint type);
}
D. [DllImport("user32", EntryPoint = "MessageBoxA", CharSet = CharSet.Unicode)] public static extern
bool MessageBox(int hWnd, [MarshalAs(UnmanagedType.
LPWStr)]String text,
[MarshalAs(UnmanagedType.LPWStr)]String caption, uint type); }
Answer: C

Microsoft   70-536   70-536   70-536자료   70-536

NO.13 You are creating an assembly named Assembly1. Assembly1 contains a public method. The global
cache contains a second assembly named Assembly2. You must ensure that the public method is only
called from Assembly2. Which permission class should you use?
A. GacIdentityPermission
B. StrongNameIdentityPermission
C. DataProtectionPermission
D. PublisherIdentityPermission
"A Composite Solution With Just One Click" - Certification Guaranteed 6 Microsoft 70-536 Exam
Answer: B

Microsoft   70-536덤프   70-536시험문제   70-536자격증   70-536

NO.14 You are writing a method to compress an array of bytes. The array is passed to the method in a
parameter named document.
You need to compress the incoming array of bytes and return the result as an array of bytes.
Which code segment should you use?
A. MemoryStream strm = new MemoryStream(document);
DeflateStream deflate = new DeflateStream(strm,
CompressionMode.Compress);
byte[] result = new byte[document.Length];
deflate.Write(result,0, result.Length);
return result;
B. MemoryStream strm = new MemoryStream(document);
DeflateStream deflate = new DeflateStream(strm,
CompressionMode.Comress);
deflate.Write(document, 0, document.Length);
deflate.Close();
return strm.ToArray();
C. MemoryStream strm = new MemoryStream();
DeflateStream deflate = new DeflateStream(strm,
CompressionMode.Compress);
deflate.Write(document, 0, document.Length);
deflate.Close();
return strm.ToArray();
D. MemoryStream inStream = new MemoryStream(document);
DeflateStream deflate = new DeflateStream(inStream,
CompressionMode.Compress);
MemoryStream outStream = new MemoryStream();
int b;
while ((b = deflate.ReadByte()) != -1)
{
outStream.WriteByte((byte)b);
}
return outStream.ToArray();
Answer: C

Microsoft최신덤프   70-536자격증   70-536

NO.15 You are developing a method to hash data for later verification by using the MD5 algorithm. The data is
passed to your method as a byte array named message. You need to compute the hash of the incoming
parameter by using MD5. You also need to place the result into a byte array. Which code segment should
you use?
A. HashAlgorithm algo = HashAlgorithm.Create("MD5");
byte[] hash = algo.ComputeHash(message);
B. HashAlgorithm algo = HashAlgorithm.Create("MD5");
byte[] hash = BitConverter.GetBytes(algo.GetHashCode());
C. HashAlgorithm algo;
algo = HashAlgorithm.Create(message.ToString());
byte[] hash = algo.Hash;
D. HashAlgorithm algo = HashAlgorithm.Create("MD5");
byte[] hash = null;
algo.TransformBlock(message, 0, message.Length, hash, 0); "A Composite Solution With Just One Click"
- Certification Guaranteed 16 Microsoft 70-536 Exam
Answer: A

Microsoft자격증   70-536 dumps   70-536덤프   70-536최신덤프

NO.16 You are developing a method to hash data with the Secure Hash Algorithm. The data is passed to your
method as a byte array named message. You need to compute the hash of the incoming parameter by
using SHA1. You also need to place the result into a byte array named hash. Which code segment should
you use?
A. SHA1 sha = new SHA1CryptoServiceProvider();
byte[] hash = null;
sha.TransformBlock(message, 0, message.Length, hash, 0);
B. SHA1 sha = new SHA1CryptoServiceProvider();
byte[] hash = BitConverter.GetBytes(sha.GetHashCode());
C. SHA1 sha = new SHA1CryptoServiceProvider();
byte[] hash = sha.ComputeHash(message);
D. SHA1 sha = new SHA1CryptoServiceProvider();
sha.GetHashCode();
byte[] hash = sha.Hash;
Answer: C

Microsoft   70-536 dump   70-536자료   70-536시험문제

NO.17 You need to create a class definition that is interoperable along with COM.
You need to ensure that COM applications can create instances of the class and can call the GetAddress
method.
Which code segment should you use?
A. public class Customer{
string addressString;
public Customer(string address)
{
addressString = address;
}
public string GetAddress()
{
return addressString;
}
}
B. public class Customer {
static string addressString;
public Customer() { }
public static string GetAddress()
{
return addressString;
}
}
C. public class Customer {
string addressString;
public Customer() { }
public string GetAddress()
{
return addressString;
}
}
D. public class Customer {
string addressString;
public Customer() { }
internal string GetAddress()
{
return addressString;
}
}
Answer: C

Microsoft   70-536   70-536   70-536   70-536자격증

NO.18 You use Reflection to obtain information about a method named My Method. You need to ascertain
whether MyMethod is accessible to a derived class. What should you do.?
A. Call the IsAssembly property of the MethodInfo class.
B. Call the IsVirtual property of the MethodInfo class.
C. Call the IsStatic property of the MethodInfo class.
D. Call the IsFamily property of the MethodInfo class.
Answer: D

Microsoft   70-536시험문제   70-536시험문제   70-536최신덤프   70-536

NO.19 Your application uses two threads, named thread One and thread Two. You need to modify the code to
prevent the execution of thread One until thread Two completes execution.
What should you do?
A. Configure threadOne to run at a lower priority.
B. Configure threadTwo to run at a higher priority.
C. Use a WaitCallback delegate to synchronize the threads.
D. Call the Sleep method of threadOne.
E. Call the SpinLock method of threadOne.
Answer: C

Microsoft dumps   70-536덤프   70-536 pdf

NO.20 You are developing a custom-collection class. You need to create a method in your class. You need to
ensure that the method you create in your class returns a type that is compatible with the Foreach
statement. Which criterion should the method meet?
A. The method must return a type of either IEnumerator or IEnumerable.
B. The method must return a type of IComparable.
C. The method must explicitly contain a collection.
D. The method must be the only iterator in the class.
Answer: A

Microsoft   70-536자격증   70-536 dump   70-536기출문제   70-536

우리ITExamDump에는 아주 엘리트 한 전문가들로 구성된 팀입니다 그들은 끈임 없는 연구와 자기자신만의 지식으로 많은 IT관연 덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다, 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Microsoft 70-536시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump덤프들은 모두 보장하는 덤프들이며 여러분은 과감히 ITExamDump의 덤프를 장바구니에 넣으세요. ITExamDump에서 여러분의 꿈을 이루어 드립니다.