NS0-163 덤프 Network Appliance 인증 시험

요즘 같은 인재가 많아지는 사회에도 많은 업계에서는 아직도 관련인재가 부족하다고 합니다.it업계에서도 이러한 상황입니다.Network Appliance NS0-163시험은 it인증을 받을 수 있는 좋은 시험입니다. 그리고ITExamDump는Network Appliance NS0-163덤프를 제공하는 사이트입니다.

ITExamDump 에서는 IT인증시험에 대비한 퍼펙트한Network Appliance 인증NS0-163덤프를 제공해드립니다. 시험공부할 시간이 충족하지 않은 분들은ITExamDump 에서 제공해드리는Network Appliance 인증NS0-163덤프로 시험준비를 하시면 자격증 취득이 쉬워집니다. 덤프를 구매하시면 일년무료 업데이트서비스도 받을수 있습니다.

ITExamDump는 많은 분들이Network Appliance인증NS0-163시험을 응시하여 성공하도록 도와주는 사이트입니다ITExamDump의 Network Appliance인증NS0-163 학습가이드는 시험의 예상문제로 만들어진 아주 퍼펙트한 시험자료입니다. Network Appliance인증NS0-163시험은 최근 가장 인기있는 시험으로 IT인사들의 사랑을 독차지하고 있으며 국제적으로 인정해주는 시험이라 어느 나라에서 근무하나 제한이 없습니다. ITExamDump로 여러분은 소유하고 싶은 인증서를 빠른 시일내에 얻게 될것입니다.

우리ITExamDump 사이트에서Network Appliance NS0-163관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다.빨리 우리 ITExamDump의 덤프를 만나보세요.

시험 번호/코드: NS0-163

시험 이름: Network Appliance (Network Appliance Data Protection Solutions)

ITExamDump에서 출시한 Network Appliance인증 NS0-163덤프는 실제시험문제 커버율이 높아 시험패스율이 가장 높습니다. Network Appliance인증 NS0-163시험을 통과하여 자격증을 취득하면 여러방면에서 도움이 됩니다. ITExamDump에서 출시한 Network Appliance인증 NS0-163덤프를 구매하여Network Appliance인증 NS0-163시험을 완벽하게 준비하지 않으실래요? ITExamDump의 실력을 증명해드릴게요.

NS0-163 덤프무료샘플다운로드하기: http://www.itexamdump.com/NS0-163.html

NO.1 Which OSSV tool would you use to perform an OSSV unattended installation?
A. msipackage
B. svunattendossv
C. svconfigpackager
D. unattendpackager
Answer: C

Network Appliance자격증   NS0-163   NS0-163 dumps   NS0-163

NO.2 Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA
connected to switch bank 1, it owns the disks connected to switch bank ___.
A. 1
B. 2
C. 3
D. 4
Answer: B

Network Appliance   NS0-163자료   NS0-163   NS0-163기출문제

NO.3 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D

Network Appliance덤프   NS0-163   NS0-163기출문제   NS0-163   NS0-163

NO.4 Which command or procedure would you use to undo a volume SnapRestore operation?
A. snap restore -r <vol/snapshotname> vol <path_and_vol_name>
B. snap revert -s <vol/snapshotname> vol <path_and_vol_name>
C. snap restore undo vol <path_and_vol_name>
D. You cannot undo a SnapRestore operation at the volume level.
Answer: D

Network Appliance   NS0-163   NS0-163인증

NO.5 Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
A. throttle
B. visibility interval
C. outstanding=3s in DOT 7.2
D. using option semi-sync in DOT 7.3 and higher
Answer: CD

Network Appliance   NS0-163기출문제   NS0-163   NS0-163   NS0-163시험문제

NO.6 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A. FilerA:source_vol FilerB:destination_vol - sync
B. FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD

Network Appliance   NS0-163   NS0-163 dump   NS0-163자료

NO.7 The ONTAP SnapVault primary license on the target storage system is required for Open System
SnapVault.
A. True
B. False
Answer: B

Network Appliance dump   NS0-163   NS0-163   NS0-163

NO.8 A NearStore license increases the amount of concurrent replication streams.
A. True
B. False
Answer: A

Network Appliance   NS0-163   NS0-163인증   NS0-163   NS0-163 dumps

NO.9 The snapvault snap sched -x command is used to ____________.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D

Network Appliance   NS0-163   NS0-163

NO.10 The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from
your primary system.
A. True
B. False
Answer: A

Network Appliance dumps   NS0-163시험문제   NS0-163 dumps   NS0-163

NO.11 Before enabling an active/active configuration, you should verify and compare the configuration of the
nodes. Which tool can perform this task?
A. cf-config-check.cgi script
B. cf status command on both nodes
C. clustercheck script
D. Release Comparison Tool
Answer: A

Network Appliance   NS0-163 dump   NS0-163   NS0-163   NS0-163덤프

NO.12 Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
A. aggr create aggrX -d 12
B. aggr create aggrX -m 12
C. aggr mirror aggrX -m 12
D. aggr mirror aggrX -n 12
Answer: B

Network Appliance최신덤프   NS0-163기출문제   NS0-163   NS0-163최신덤프

NO.13 What is the correct format for the scheduling component of a SnapVault schedule?
A. YYYY-MM-DD
B. crontab format
C. cnt[@day_list][@hour_list]
D. List of dates in ISO Date format
Answer: C

Network Appliance   NS0-163인증   NS0-163   NS0-163자격증   NS0-163   NS0-163

NO.14 Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility run automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV
transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV
transfer.
Answer: C

Network Appliance최신덤프   NS0-163최신덤프   NS0-163덤프   NS0-163 dump   NS0-163

NO.15 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the
state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B

Network Appliance자격증   NS0-163   NS0-163   NS0-163자료

NO.16 Which system is recommended as a secondary system for SnapVault?
A. IS1200
B. DataFort
C. NearStore VTL
D. FAS with NearStore license
Answer: D

Network Appliance   NS0-163   NS0-163   NS0-163 dumps   NS0-163 pdf

NO.17 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B

Network Appliance   NS0-163최신덤프   NS0-163시험문제   NS0-163

NO.18 Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
A. Running snapmirror update on the source storage system
B. Running snapmirror release on the source storage system
C. Modifying the /etc/snapmirror.conf file for the relationship on the source storage system
D. Modifying the /etc/snapmirror.conf file for the relationship on the destination storage system
Answer: D

Network Appliance   NS0-163 dumps   NS0-163기출문제   NS0-163

NO.19 Which option will allow a storage system to SnapMirror from this source system?
A. snapmirror.access <destination_filer>
B. snapmirror.destination <destination_filer>
C. options snapmirror.allow host = <destination_filer>
D. options snapmirror.access host = <destination_filer>
Answer: D

Network Appliance자격증   NS0-163   NS0-163시험문제

NO.20 Which is true of the SnapVault backup of NetApp storage system?
A. The file is the basic unit for SnapVault backup destination.
B. The qtree is the basic unit for SnapVault backup destination.
C. The volume is the basic unit of SnapVault backup destination.
D. The directory is the basic unit for SnapVault backup destination.
Answer: B

Network Appliance기출문제   NS0-163시험문제   NS0-163   NS0-163   NS0-163

ITExamDump의 Network Appliance인증 NS0-163시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 Network Appliance인증 NS0-163덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. Network Appliance인증 NS0-163시험을 통과하여 자격증을 취득하려면ITExamDump의 Network Appliance인증 NS0-163덤프로 시험준비공부를 하세요.