2014년 4월 17일 목요일

HP0-Y18 덤프 HP 자격증

지금 같은 경쟁력이 심각한 상황에서HP HP0-Y18시험자격증만 소지한다면 연봉상승 등 일상생활에서 많은 도움이 될 것입니다.HP HP0-Y18시험자격증 소지자들의 연봉은 당연히HP HP0-Y18시험자격증이 없는 분들보다 높습니다. 하지만 문제는HP HP0-Y18시험패스하기가 너무 힘듭니다. ITExamDump는 여러분의 연봉상승을 도와 드리겠습니다.

ITExamDump 에서 제공해드리는 HP인증HP0-Y18시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. HP인증HP0-Y18시험은ITExamDump 표HP인증HP0-Y18덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.

ITExamDump전문가들은HP HP0-Y18인증시험만을 위한 특별학습가이드를 만들었습니다.HP HP0-Y18인증시험을 응시하려면 30분이란 시간만 투자하여 특별학습가이드로 빨리 관련지식을 장악하고,또 다시 복습하고 안전하게HP HP0-Y18인증시험을 패스할 수 잇습니다.자격증취득 많은 시간과 돈을 투자한 분들보다 더 가볍게 이루어졌습니다

HP 인증HP0-Y18인증시험공부자료는ITExamDump에서 제공해드리는HP 인증HP0-Y18덤프가 가장 좋은 선택입니다. ITExamDump에서는 시험문제가 업데이트되면 덤프도 업데이트 진행하도록 최선을 다하여 업데이트서비스를 제공해드려 고객님께서소유하신 덤프가 시장에서 가장 최신버전덤프로 되도록 보장하여 시험을 맞이할수 있게 도와드립니다.

시험 번호/코드: HP0-Y18
시험 이름: HP (ProCurve Secure Mobility Solutions)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 104 문항
업데이트: 2014-04-16

ITExamDump의HP인증 HP0-Y18시험대비 덤프는 가격이 착한데 비하면 품질이 너무 좋은 시험전 공부자료입니다. 시험문제적중율이 높아 패스율이 100%에 이르고 있습니다.다른 IT자격증에 관심이 있는 분들은 온라인서비스에 문의하여 덤프유무와 적중율등을 확인할수 있습니다. HP인증 HP0-Y18덤프로 어려운 시험을 정복하여 IT업계 정상에 오릅시다.

만약 아직도 우리를 선택할지에 대하여 망설이고 있다면. 우선은 우리 사이트에서 ITExamDump가 제공하는 무료인 일부 문제와 답을 다운하여 체험해보시고 결정을 내리시길 바랍니다.그러면 우리의 덤프에 믿음이;갈 것이고,우리 또한 우리의 문제와 답들은 무조건 100%통과 율로 아주 고득점으로HP인증HP0-Y18험을 패스하실 수 있습니다,

HP0-Y18 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y18.html

NO.1 When can a station no longer communicate with an AP?
A. when the received signal falls below 0 dBm
B. when the received signal falls below the background noise
C. when the received signal falls below the station's receiver sensitivity
D. when the received signal falls below the fade margin for the wireless cell
Answer: C

HP   HP0-Y18   HP0-Y18자료

NO.2 Which security option was part of the original 802. 11 standard?
A. 802. 1X
B. Shared-key WEP
C. Dynamic Wired Equivalent Privacy (WEP)
D. Wi-Fi Protected Access with preshared keys (WPA-PSK)
Answer: B

HP dumps   HP0-Y18   HP0-Y18   HP0-Y18 pdf

NO.3 You are configuring a ProCurve AP 530.You configure two WLANs.What is one reason to enable the
first WLAN only on radio 1 and the second WLAN only on radio 2?
A. to overcome environmental obstacles
B. to double the capacity of each WLAN by using two radios
C. to separate different types of wireless traffic into different collision domains
D. to allow users to choose their radio but still connect to the same Basic Service Set (BSS)
Answer: C

HP   HP0-Y18시험문제   HP0-Y18최신덤프   HP0-Y18자격증

NO.4 The ProCurve AP 420 radio has one Basic Service Set Identifier (BSSID), and each of the two AP 530
radios has 16 BSSIDs.What is the implication of this difference?
A. The AP 420 can advertise only 1 WLAN, but the AP 530 can advertise 16.
B. The AP 420 can support only 1 WLAN, but the AP 530 can support 32.
C. The AP 420 can support only 1 WLAN, but the AP 530 can support 16.
D. The AP 420 can advertise only 1 WLAN, but the AP 530 can advertise 32.
Answer: A

HP pdf   HP0-Y18덤프   HP0-Y18인증

NO.5 You want ProCurve Radio Port (RP) 1's radio to function as a neighbor for RP 2's radio.RP 1 will
monitor RP 2 and take action if RP 2 becomes unavailable.You configure RP 1's radio to take which
action if RP 2 becomes unavailable? (Select two. )
A. Open its data rates.
B. Change the radio's channel.
C. Increase the radio's transmit power.
D. Order stations associated with RP 2 to roam.
E. Change the radio mode from 802. 11a to 802. 11b/g.
Answer: AC

HP자료   HP0-Y18시험문제   HP0-Y18

NO.6 The ProCurve Mobility Manager (PMM) site-planning tool provides an Auto Placement tool.What does
this tool take into account as it places devices on the floor plan?
A. the existing RF interference
B. the obstacles that you have defined
C. other devices already placed on the floor plan
D. the floor plan dimensions and desired capacity
Answer: D

HP자격증   HP0-Y18   HP0-Y18   HP0-Y18   HP0-Y18

NO.7 You need to provide a wireless network for a small area that will require two access points.For this
wireless network, you want to support both 802. 11b/g and 802. 11a radios throughout the entire
coverage area.What would you choose?
A. two ProCurve AP 420s
B. two ProCurve AP 530s
C. ProCurve Wireless LAN System with two Radio Port (RP) 210s
D. ProCurve Wireless LAN System with one RP 230 and one RP 210
Answer: B

HP   HP0-Y18 dumps   HP0-Y18   HP0-Y18시험문제

NO.8 What purpose does the second software image on the ProCurve AP 420 serve?
A. It allows you to choose two different images to load onto the AP.
B. It allows you to keep the last software image that was loaded onto the AP.
C. It provides a failsafe image in the event the primary image becomes corrupted.
D. It provides an alternate software version in the event the primary does not support your configuration.
Answer: C

HP시험문제   HP0-Y18 dump   HP0-Y18 dump   HP0-Y18

NO.9 What does the slot time determine?
A. the number of seconds the AP waits between sending beacons
B. the length of time the station waits between detecting a transmission and sending a frame
C. the beginning of the 802. 11 frame, which enables the AP and the station to synchronize their
transmissions
D. how long the station can "sleep" before it must become active and check the AP to see if there are any
transmissions waiting for it
Answer: B

HP덤프   HP0-Y18   HP0-Y18기출문제

NO.10 What does Spanning Tree Protocol (STP) on the ProCurve AP 530 prevent?
A. loops over connections to stations in the wireless network
B. loops over the APs Ethernet and wireless bridge connections
C. loops over connections between stations in the wireless and the wired network
D. loops over connections between only wireless stations associated with multiple APs
Answer: B

HP인증   HP0-Y18   HP0-Y18시험문제   HP0-Y18

NO.11 How many configuration files can be stored on the ProCurve AP 420?
A. 2: the startup-config and the factory default config
B. 3: the startup-config, the factory default config, and one custom config
C. 3: the factory default config, the startup-config, and the backup startup-config
D. 4: the factory default config, the startup-config, the backup startup-config, and one custom config
Answer: A

HP   HP0-Y18기출문제   HP0-Y18

NO.12 What is the default management username and password on the ProCurve AP 530?
A. The username is admin, and the password is admin.
B. The username is admin, and the password is procurve.
C. The username is manager, and the password is procurve.
D. The username is admin, and there is no default password.
Answer: A

HP   HP0-Y18인증   HP0-Y18   HP0-Y18기출문제   HP0-Y18기출문제

NO.13 Your company has a branch office down the street from your main office.You want to connect the
networks between the two offices, and physical cabling is not an option.Which wireless devices should
you select for this environment?
A. two ProCurve AP 420s
B. two ProCurve AP 530s
C. two RP 230s and a Wireless Edge Services xl Module
D. two RP 220s with Yagi antennas and a Wireless Edge Services zl Module
Answer: B

HP   HP0-Y18시험문제   HP0-Y18   HP0-Y18   HP0-Y18

NO.14 What is a function of ProCurve Identity Driven Manager (IDM)?
A. It identifies which wireless users must associate to the wireless network.
B. It enables you to load different configuration files onto your ProCurve Mobility Infrastructure devices.
C. It guides you in creating policies that can be applied, through RADIUS, to either wired or wireless
users.
D. It adds special features to ProCurve Manager (PCM) for configuring radio and wireless security
settings.
Answer: C

HP   HP0-Y18   HP0-Y18

NO.15 Wireless networks present certain challenges.Which wireless network challenge does ProCurve
Mobility Infrastructure Solutions help you address?
A. Users are less productive when using a wireless connection.
B. 802. 11 standards do not provide any guidelines for Layer 2 roaming.
C. 802. 11 standards do not provide any encryption, so you must create VPN tunnels to each end station.
D. Multiple users connect to the network through the same AP, but access must be authorized for each
user.
Answer: D

HP   HP0-Y18   HP0-Y18   HP0-Y18자격증

NO.16 Your company wants to use the 2. 4GHz frequency on both of your ProCurve AP 530 radios.What
must you do so that both radios can use this frequency?
A. Set both radios to either 802. 11g or 802. 11b.
B. Set both radios to either 802. 11g or 802. 11b, and install an external antenna for radio 2.
C. Install an 802. 11b/g card on radio 2, and set both radios to either 802. 11g or 802. 11b.
D. Set one radio to 802. 11g and one radio to 802. 11b, install an external antenna for radio 1, and
configure radio 1 to use an external antenna.
Answer: B 18. Which ProCurve AP 530 feature is most beneficial for a small to medium business that has
strong security needs?
A. It monitors for excessive probes to detect possible intrusion attempts.
B. Its internal RADIUS server provides standalone support for 802. 1X authentication.
C. Unlike the ProCurve AP 420, it can operate all 16 of its wireless LANs in closed system.
D. It supports 802. 11a, and hackers generally do not check for networks on this frequency.
Answer: B

HP   HP0-Y18   HP0-Y18   HP0-Y18
19. A network administrator accesses the Marketing WLAN, which is assigned to VLAN 32 on the
ProCurve AP 530.When the AP 530 submits the administrator's login credentials to the RADIUS server,
the RADIUS server returns a dynamic VLAN assignment of 10 to the AP 530.The AP 530 is using the
default settings for dynamic and static VLAN support. In which VLAN does the AP 530 place the network
administrator's traffic?
A. 32, because dynamic VLANs are disabled by default
B. the default management VLAN, because there is a VLAN conflict
C. 10, because dynamic VLAN assignments override static VLAN assignments
D. 32, because static VLAN assignments override dynamic VLAN assignments
Answer: C

HP   HP0-Y18시험문제   HP0-Y18기출문제   HP0-Y18   HP0-Y18 dump
20. You are configuring a WLAN on the ProCurve AP 420.When students, faculty members, and
administrators associate to the WLAN, you want them to receive the dynamic VLAN assignment for their
particular group.However, when staff members associate to the WLAN you want their traffic to be placed
in the VLAN that is assigned to the WLAN. How do you configure the AP 420 to support these VLAN
assignments?
A. You select the Dynamic VLAN option for the WLAN.Static VLANs are supported by default.
B. You select both the Static and Dynamic VLAN options.These global options apply to the entire AP 420.
C. You select the Enable VLAN option for the WLAN.This option enables support for both static and
dynamic VLANs on this WLAN only.
D. You select the Dynamic VLAN option, which enables both static and dynamic VLANs.This global
option applies to the entire AP 420.
Answer: D

HP dump   HP0-Y18 dumps   HP0-Y18   HP0-Y18

NO.17 Which Quality of Service (QoS) mechanism do both the ProCurve AP 420 and the ProCurve AP 530
support?
A. Wi-Fi Multimedia (WMM)
B. SpectraLink Voice Priority (SVP)
C. Differentiated Services (DiffServ)
D. Wi-Fi Multimedia Extensions (WME)
Answer: B

HP   HP0-Y18 dumps   HP0-Y18   HP0-Y18자격증   HP0-Y18 pdf   HP0-Y18

ITexamdump의 642-427덤프의 VCE테스트프로그램과 700-303덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 NS0-145시험에 대비한 고품질 덤프와 350-029시험 최신버전덤프를 제공해드립니다. 최고품질 1Z0-061시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/HP0-Y18.html

댓글 없음:

댓글 쓰기