Juniper인증JN0-532 JN0-560 JN0-570 JN0-330 JN0-531시험을 패스함으로 취업에는 많은 도움이 됩니다. ITExamDump는Juniper인증JN0-532 JN0-560 JN0-570 JN0-330 JN0-531시험패스로 꿈을 이루어주는 사이트입니다. 우리는Juniper인증JN0-532 JN0-560 JN0-570 JN0-330 JN0-531시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게Juniper인증JN0-532 JN0-560 JN0-570 JN0-330 JN0-531시험을 응시할 수 있는 자료입니다.
Juniper인증 JN0-532 JN0-560 JN0-570 JN0-330 JN0-531시험은 IT인증시험중 가장 인기있는 시험입니다. Juniper인증 JN0-532 JN0-560 JN0-570 JN0-330 JN0-531시험패스는 모든 IT인사들의 로망입니다. ITExamDump의 완벽한 Juniper인증 JN0-532 JN0-560 JN0-570 JN0-330 JN0-531덤프로 시험준비하여 고득점으로 자격증을 따보세요.
ITExamDump의 Juniper인증 JN0-532 JN0-560 JN0-570 JN0-330 JN0-531덤프를 선택하여Juniper인증 JN0-532 JN0-560 JN0-570 JN0-330 JN0-531시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고Juniper인증 JN0-532 JN0-560 JN0-570 JN0-330 JN0-531시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. Juniper인증 JN0-532 JN0-560 JN0-570 JN0-330 JN0-531덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.
ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려져 있습니다. 그리고 여러분에 신뢰를 드리기 위하여 Juniper 인증JN0-532 JN0-560 JN0-570 JN0-330 JN0-531 관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. ITExamDump제품에 대하여 아주 자신이 있습니다. Juniper 인증JN0-532 JN0-560 JN0-570 JN0-330 JN0-531 도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다.
ITExamDump는 IT인증자격증을 취득하려는 IT업계 인사들의 검증으로 크나큰 인지도를 가지게 되었습니다. 믿고 애용해주신 분들께 감사의 인사를 드립니다. Juniper JN0-532 JN0-560 JN0-570 JN0-330 JN0-531덤프도 다른 과목 덤프자료처럼 적중율 좋고 통과율이 장난이 아닙니다. 덤프를 구매하시면 퍼펙트한 구매후 서비스까지 제공해드려 고객님이 보유한 덤프가 항상 시장에서 가장 최신버전임을 약속해드립니다. Juniper JN0-532 JN0-560 JN0-570 JN0-330 JN0-531덤프만 구매하신다면 자격증 취득이 쉬워져 고객님의 밝은 미래를 예약한것과 같습니다.
시험 번호/코드: JN0-532
시험 이름: Juniper (FWV,Specialist (JNCIS -FWV))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 146 문항
업데이트: 2014-04-22
시험 번호/코드: JN0-560
시험 이름: Juniper (Certified Internet Associate.....)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2014-04-22
시험 번호/코드: JN0-570
시험 이름: Juniper (JN0-570 JNCIS-SSL EXAM)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 150 문항
업데이트: 2014-04-22
시험 번호/코드: JN0-330
시험 이름: Juniper (JN0-330-Enhanced Services, Specialist(JNCIS-ES))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 150 문항
업데이트: 2014-04-22
시험 번호/코드: JN0-531
시험 이름: Juniper (FWV, Specailist(JNCIS-FWV))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 145 문항
업데이트: 2014-04-22
JN0-532 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-532.html
NO.1 Click the Exhibit button.
Review the exhibit. Track-ip has failed on the device, but the device did not fail over to the second unit in
the cluster:
Why has failover not occurred?
A.The physical interfaces have not failed.
B.The track-ip interval is not sufficient to cause failover.
C.The track-ip address weight is not sufficient to cause failover.
D.The track-ip address threshold is not sufficient to cause failover.
Answer: C
Juniper JN0-532인증 JN0-532최신덤프 JN0-532 JN0-532 JN0-532시험문제
NO.2 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: AD
Juniper JN0-532기출문제 JN0-532 JN0-532시험문제 JN0-532 JN0-532
NO.3 Review the exhibit.
Which two of the following elements must be configured on the ScreenOS device in order to support
PIM-SM? (Choose two)
A.A multicast control policy
B.A bootstrap router process
C.A unicast routing protocol
D.A static RP
Answer: AC
Juniper JN0-532 JN0-532인증 JN0-532인증
NO.4 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A.set igmp interface ethernet0/1
B.set multicast interface ethernet0/1
C.set interface ethernet0/1 igmp router
D.set igmp interface ethernet0/1 enable
Answer: C
Juniper기출문제 JN0-532기출문제 JN0-532 JN0-532 pdf
NO.5 You have entered the command set ffilter src-ip 1.1.7.250 dst-ip 10.1.10.5 ip-prot 6
What will be the resulting output in the debug for which this was created?
A.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has TCP as its protocol then it will be
captured
B.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has UDP as its protocol then it will be
captured
C.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has TCP as its protocol then it will
be captured
D.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has UDP as its protocol then it will
be captured
Answer: C
Juniper dump JN0-532 pdf JN0-532인증 JN0-532
NO.6 Click the Exhibit button.
In the exhibit, the firewall administrator at the Storefront is complaining that when the communication to
the DataCenter1 fails, the preexisting transfers and applications are dropped when the traffic is switched
to DataCenter2.
Which statement explains this behavior?
A.SYN checking is enabled in the tunnel.
B.The weight value for the DataCenter2 is too high.
C.VPN monitor is misconfigured in the DataCenter2.
D.Phase 1 and Phase 2 negotiations to DataCenter2 did not occur on time.
Answer: A
Juniper인증 JN0-532시험문제 JN0-532 dump JN0-532
NO.7 Which command is used to verify that IGMP is running correctly?
A.get route igmp
B.get igmp query
C.set igmp query interface e0/1
D.exec igmp interface e0/1 query
Answer: D
Juniper JN0-532자격증 JN0-532 JN0-532기출문제 JN0-532 pdf JN0-532 dumps
NO.8 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A.236.1.1.1
B.10.10.10.1
C.20.20.20.10
D.20.20.20.200
Answer: B
Juniper dump JN0-532 JN0-532
NO.9 You have created a virtual router called VSYSA-vr and made it shareable. You then create the VSYS
using the WebUI, telling it to use an existing VR and selecting the VR called VSYSA-vr.
What is the status of the virtual router after you create the VSYS?
A.The router will be the default router but will no longer be shared.
B.The router will be the default router and will still have a shareable status.
C.The system will not let you use a shared virtual router when you create a new VSYS. The initial virtual
router must be private.
D.The system will not create a private vr for the VSYS but will assign the untrust-vr as the default router.
The shared Virtual router will not be the default router.
Answer: B
Juniper JN0-532 JN0-532시험문제 JN0-532
NO.10 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A.get route pim
B.get igmp source all
C.exec pim interface all query
D.get vrouter trust-vr protocol pim
Answer: D
Juniper자격증 JN0-532 pdf JN0-532자격증 JN0-532최신덤프 JN0-532
NO.11 Which three statements are true regarding IKE Phase 1? (Choose three.)
A.Placing the SA proposal list in message 1 is an option.
B.The digital certificate is used to decrypt the session key.
C.The DH key exchange is used to validate the session key.
D.The DH key exchange and digital certificates are both optional.
E.The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC
Juniper dump JN0-532자격증 JN0-532 JN0-532기출문제 JN0-532
NO.12 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A.messages 1 & 2
B.messages 2 & 3
C.messages 3 & 4
D.messages 5 & 6
Answer: D
Juniper최신덤프 JN0-532 JN0-532 dumps JN0-532자격증
NO.13 What must be enabled to protect Phase 2 key exchanges?
A.Phase 1 PFS
B.Phase 2 SHA
C.Phase 2 3-DES
D.Phase 2 DH key exchange tiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: D
Juniper pdf JN0-532최신덤프 JN0-532 JN0-532최신덤프 JN0-532
NO.14 Click the Exhibit button.
In the exhibit, what is the address of the multicast receiver?
A.234.9.8.42
B.192.168.10.2
C.192.168.20.10
D.192.168.20.200
Answer: D
Juniper JN0-532 dump JN0-532 JN0-532 JN0-532자격증
NO.15 Which three OSPF parameters are interface parameters? (Choose three.)
A.cost
B.priority
C.neighbor list
D.summarization
E.advertise default route
Answer: ABC
Juniper기출문제 JN0-532기출문제 JN0-532최신덤프 JN0-532
NO.16 You have configured the following on your device.
set address trust MyPC 10.1.1.5/32
set address untrust CorpNet 10.10.0.0/16
set policy from trust to untrust MyPC CorpNet any permit
set int tunnel.1 zone untrust
set int tunnel.1 ip unnumbered int bgroup1
set ike gateway GW address 1.1.1.1 outgoing-interface e0/1 preshare Secret sec-level standard
set vpn VPN gateway GW sec-level standard
The tunnel interface is down, so the VPN cannot function properly. What is the problem?
A.The policy needs to have the action tunnel.
B.The VPN needs to be bound to the tunnel interface.
C.The tunnel interface needs to be placed in the trust zone.
D.The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B
Juniper JN0-532 dumps JN0-532자료 JN0-532 JN0-532
NO.17 Review the exhibit.
You've been asked to build a route-based hub and spoke network, with policy control for traffic travelling
from spoke to spoke. Which two of the following configuration options will meet this requirement?
(Choose two.)
A.Place the spoke tunnel interfaces in the trust zone and create policies on the spokes.
B.Place the spoke tunnel interfaces in the untrust zone and create policies on the spokes.
C.Create a single tunnel interface in the trust zone at the hub and enable intra-zone blocking.
D.Create separate tunnel interfaces at the hub and place them in different zones, then create policies at
the hub.
Answer: BD
Juniper JN0-532 dump JN0-532 JN0-532자료
NO.18 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A.zone
B.policy
C.interface
D.virtual router
E.virtual system
Answer: ACD
Juniper JN0-532 JN0-532 JN0-532자격증
NO.19 Click the Exhibit button.
In the exhibit, which two can be determined about the VPN? (Choose two.)
A.NAT-traversal is enabled.
B.The rekey interval is 8 hours.
C.This device initiated the Phase 1 negotiations.
D.The certificate used in this exchange is set to never expire.
Answer: BC
Juniper JN0-532인증 JN0-532 JN0-532기출문제 JN0-532
NO.20 What must be configured differently for a route-based VPN and a policy-based VPN?
A.proxy-id
B.proposals
C.remote gateway type
D.binding the tunnel interface
Answer: D
Juniper JN0-532 dumps JN0-532 JN0-532
댓글 없음:
댓글 쓰기