C2050-241인증시험은IBM사의 인중시험입니다.IBM인증사의 시험을 패스한다면 it업계에서의 대우는 달라집니다. 때문에 점점 많은 분들이IBM인증C2050-241시험을 응시합니다.하지만 실질적으로C2050-241시험을 패스하시는 분들은 너무 적습니다.전분적인 지식을 터득하면서 완벽한 준비하고 응시하기에는 너무 많은 시간이 필요합니다.하지만 우리ITExamDump는 이러한 여러분의 시간을 절약해드립니다.
IT업계에 종사하고 계시나요? 최근 유행하는IBM인증 P2090-095 IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 IBM인증 P2090-095덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 IBM인증 P2090-095덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?
ITExamDump의 IBM인증 P2090-095시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 IBM인증 P2090-095덤프가 신뢰성을 다시 한번 인증해주는것입니다. IBM인증 P2090-095시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 IBM인증 P2090-095덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.
시험 이름: IBM Sterling Order Management V9.2, Solution Design
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 C2050-241응시료
100% 합격율 보장
Q&A: 54 문항 C2050-241 Dump
업데이트: 2014-05-11
C2050-241응시료: >>펼쳐보기
시험 이름: IBM InfoSphere QualityStage Fundamentals Technical Mastery Test v1
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 P2090-095자격시험
100% 합격율 보장
Q&A: 41 문항 P2090-095자격시험
업데이트: 2014-05-11
P2090-095자격시험: >>펼쳐보기
ITExamDump는 여러분이IBM 인증P2090-095인증시험 패스와 추후사업에 모두 도움이 되겠습니다. ITExamDump제품을 선택함으로 여러분은 시간도 절약하고 돈도 절약하는 일석이조의 득을 얻을수 있습니다. 또한 구매후 일년무료 업데이트 버전을 받을수 있는 기회를 얻을수 있습니다. IBM 인증P2090-095 인증시험패스는 아주 어렵습니다. 자기에 맞는 현명한 학습자료 선택은 성공의 지름길을 내딛는 첫발입니다. 퍼펙트한 자료만이 시험에서 성공할수 있습니다. ITExamDump시험문제와 답이야 말로 퍼펙트한 자료이죠. ITExamDump IBM 인증P2090-095인증시험자료는 100% 패스보장을 드립니다.
ITExamDump의 도움으로 여러분은 많은 시간과 돈을 들이지 않으셔도 혹은 여러학원등을 다니시지 않으셔도 우리 덤프로 안전하게 시험을 통과하실 수 있습니다.IBM P2090-095시험자료는 우리 ITExamDump에서 실제시험에 의하여 만들어진 것입니다. 지금까지의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는IBM P2090-095시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.
많은 사이트에서IBM 인증C2050-241 인증시험대비자료를 제공하고 있습니다. 그중에서 ITExamDump를 선택한 분들은IBM 인증C2050-241시험통과의 지름길에 오른것과 같습니다. ITExamDump는 시험에서 불합격성적표를 받으시면 덤프비용을 환불하는 서
IBM P2090-095인증시험패스에는 많은 방법이 있습니다. 먼저 많은 시간을 투자하고 신경을 써서 전문적으로 과련 지식을 터득한다거나; 아니면 적은 시간투자와 적은 돈을 들여 ITExamDump의 인증시험덤프를 구매하는 방법 등이 있습니다.
C2050-241 덤프무료샘플다운로드하기: http://www.itexamdump.com/C2050-241.html
NO.1 A customer would like a purchase order (PO) to be "Created", but it should only treat 80% of
future supply as available. This should happen until the PO receives a status update that indicates its
been "Approved", at which point 90% of the future supply can be considered for promising. Future
supply can be considered when scheduling orders but should not be considered when releasing the
pick instructions to the fulfillment center. In order to model this requirement with MINIMAL custom
logic, the solution design must:
A. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Set up the
appropriate safety factor of 80% for supply type "Purchase order placed" and 90% for supply type
"Inbound approved".5. Use Inventory considerations to map the demand type corresponding to
schedule transaction to future supplies.6. Use Inventory considerations to map the demand type
corresponding to release transaction to use only onhand supplies.
B. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Set up the
appropriate safety factor of 80% for demand type "Scheduled" and 90% for demand type
"Released".5. Use Inventory considerations to map the demand type corresponding to schedule
transaction to future supplies.6. Use Inventory considerations to map the demand type
corresponding to release transaction to use only onhand supplies.
C. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Use
Inventory considerations to map the demand type corresponding to schedule transaction to future
supplies.5. Use Inventory considerations to map the demand type corresponding to release
transaction to use only onhand supplies.6. Implement the Supply corrections user exit to only show
80% or 90% of supply as applicable.
D. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Use
Inventory considerations to map the demand type corresponding to schedule transaction to future
supplies.5. Use Inventory considerations to map the demand type corresponding to release
transaction to use only onhand supplies.6. Implement the Availability corrections user exit to only
show 80% or 90% of supply as applicable.
Answer: A
IBM 인증 C2050-241 교재 C2050-241 교육 C2050-241 C2050-241 최신버전덤프
NO.2 A customer purchased a DVD player from a store, and later realized that some of the required
features were missing. The customer tries to return the DVD player for a refund, but the sales order
cannot be located in the Sterling application. Which type of return should be created in the Sterling
application?
A. Refund Order
B. Exchange Order
C. Blind Return Order
D. Speed Exchange Order
Answer: C
IBM 시험정보 C2050-241 시험정보 C2050-241 IT국제자격증 C2050-241 시험문제
NO.3 A business needs to configure a drop ship from a vendor to a customer directly with visibility
into the purchase order (PO) created by the vendor and status updates on the PO. What should be
done to meet this requirement?
A. 1. Model the vendor as a seller and node, where the organization does not have a hierarchical
relation with the seller organization on theorder.2. Do not check "Suppress chained order creation
even if seller requires" setting.3. Run Chained_Order_Create to create the purchase order.PO
getting shipped will result in the corresponding sales order line being shipped.
B. 1. Model the vendor as a seller and node, where the organization has a hierarchical relation with
the seller organization on the order.2. Check the "Suppress chained order creation even if seller
requires" setting.3. Run Chained_Order_Create to create the purchase order.PO getting shipped will
result in the corresponding sales order line being shipped.
C. 1. Model the vendor as a seller and node, where the organization has a hierarchical relation with
the seller organization on the order.2. Check the "Suppress chained order creation even if seller
requires" setting.3. Run Chained_Order_Create to create the PO. Place custom logic on PO
"Shipped" event to update the corresponding sales order status to"Shipped".
D. 1. Model the vendor as a seller and node, where the organization does not have a hierarchical
relation with the seller organization on theorder.2. Implement a listener on the PO pipeline that
updates the sales order pipeline.3. Implement custom logic to stamp the PO's delivery location as
customer's address.PO getting shipped will result in the corresponding sales order line being
shipped.
Answer: A
IBM 교재 C2050-241 C2050-241 자격시험 C2050-241 시험후기 C2050-241 덤프다운 C2050-241
NO.4 A retailer's delivery rules do not allow shipping for an open box television (TV) that is more
than 150 miles away. However, they do support moving this TV through a network of stores that are
spread throughout the country, until it reaches a store that supports delivery to the customer. The
retailer needs to configure such a multi-hop transfer of inventory through the supply chain and
provide an accurate promise date to a customer who is over 1000 miles away from the store with
the open box TV. In order to do so, Sterling Order Management considers all the following
configuration settings EXCEPT for:
A. Receiving store calendar.
B. Receipt Processing Time.
C. Delivery resource pool capacity.
D. Transfer relationship across stores.
Answer: C
IBM C2050-241 시험정보 C2050-241 응시료 C2050-241 기출문제
NO.5 A business requirement is to charge payment for the exchange order upfront and then refund
the customer when the returned item is received. This requirement should be configured as a:
A. even exchange.
B. regular exchange.
C. advanced exchange.
D. advanced pre-paid exchange.
Answer: D
IBM dumps C2050-241 기출문제 C2050-241 dump C2050-241 C2050-241 덤프
NO.6 In the integration between Sterling Order Management V9.2 and WebSphere Commerce,
which of the following actions will a customer service representative be UNABLE to take when
entering orders through the Sterling application?
A. Make manual adjustments in an order.
B. Enter orders for a customer who has no customer ID.
C. Pre-populate customer information from WebSphere Commerce.
D. Tell customers about promotions and discounts applied to the order.
Answer: C
IBM 후기 C2050-241 dumps C2050-241 IT자격증시험 C2050-241 자격증 C2050-241 자격증
NO.7 Which of the following Sterling Call Center business requirements CANNOT be implemented
using the out of the box application?
A. Monitor orders for FTC compliance.
B. Schedule appointments for delivery items.
C. Initiate returns and refunds to customers immediately, if required.
D. Retrieve a WebSphere Commerce shopping cart from the Sterling Call Center.
Answer: D
IBM 기출문제 C2050-241 기출문제 C2050-241 자격증덤프
댓글 없음:
댓글 쓰기