요즘 같은 인재가 많아지는 사회에도 많은 업계에서는 아직도 관련인재가 부족하다고 합니다.it업계에서도 이러한 상황입니다.Juniper JN0-314시험은 it인증을 받을 수 있는 좋은 시험입니다. 그리고ITExamDump는Juniper JN0-314덤프를 제공하는 사이트입니다.
만약 여러분은Juniper JN0-314인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까? 하지만Juniper JN0-314패스는 쉬운 일은 아닙니다.Juniper JN0-314패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠. 하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할필요는 없습니다. ITExamDump의 완벽한 자료만으로도 가능합니다. ITExamDump의 덤프들은 모두 전문적으로 IT관련인증시험에 대하여 연구하여 만들어진것이기 때문입니다.
ITExamDump 의 학습가이드에는Juniper JN0-314인증시험의 예상문제, 시험문제와 답입니다. 그리고 중요한 건 시험과 매우 유사한 시험문제와 답도 제공해드립니다. ITExamDump 을 선택하면 ITExamDump 는 여러분을 빠른시일내에 시험관련지식을 터득하게 할 것이고Juniper JN0-314인증시험도 고득점으로 패스하게 해드릴 것입니다.
시험 번호/코드: JN0-314
시험 이름: Juniper (Junos Pulse Access Control, Specialist (JNCIS-AC))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 115 문항
업데이트: 2013-12-22
ITExamDump에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Juniper인증JN0-314시험을 패스할 수 있을 자료 등을 만들었습니다, ITExamDump 에서는 일년무료 업뎃을 제공하며, ITExamDump 의 덤프들은 모두 높은 정확도를 자랑합니다. ITExamDump 선택함으로 여러분이Juniper인증JN0-314시험에 대한 부담은 사라질 것입니다.
JN0-314 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-314.html
NO.1 What is the function of Host Checker?
A. To allow clientless access to the network
B. To restrict access to protected resources on the network
C. To scan an endpointfor compliance with security policies
D. To push a firewall policy to the endpoint's local firewall application
Answer: B
Juniper기출문제 JN0-314인증 JN0-314시험문제
NO.2 You have a firewall enforcer protecting resources in a data center. A user is experiencing difficulty
connecting to a protected resource.
Which two elements must exist so the user can access the resource? (Choose two.)
A. Resource access policy on the MAG Series device
B. IPsec routing policy on the MAG Series device
C. General traffic policy blocking access through the firewall enforcer
D. Auth table entry on the firewall enforcer
Answer: A,D
Juniper JN0-314 JN0-314 JN0-314 JN0-314
NO.3 Click the Exhibit button.
What is the cause of the error shown in the exhibit?
A. A RADIUS request is being received from a device that is not configured on the RADIUS Client page.
B. A user entered an incorrect password during RADIUS authentication.
C. A RADIUS proxy attempt failed to reach the configured proxy server.
D. The RADIUS shared secret is incorrect.
Answer: A
Juniper dumps JN0-314 JN0-314 JN0-314최신덤프 JN0-314시험문제
NO.4 A customer is trying to decide which 802.1X inner protocol to use on their network. The customer
requires that no passwords be sent across the network in plain text, that the protocol be supported by the
Windows native supplicant, and that the protocol supports password changes at Layer 2.
Which protocol would meet the customer's needs?
A. EAP-TLS
B. EAP-MD5
C. PAP
D. EAP-MSCHAPv2
Answer: D
Juniper인증 JN0-314기출문제 JN0-314자료 JN0-314
NO.5 You are configuring an IPsec routing policy that will be used with a ScreenOS firewall enforcer. What
must you also configure?
A. Source IP policies on the ScreenOS device
B. ScreenOS IPsec policies on the Junos Pulse Access Control Service
C. VPN NAT traversal on the ScreenOS device
D. Source interface policies on the Junos Pulse Access Control Service
Answer: B
Juniper JN0-314자격증 JN0-314기출문제
NO.6 What is a type of firewall enforcer supported by the Junos Pulse Access Control Service.?
A. Checkpoint firewall
B. SRX Series device
C. DP sensor
D. MX Series device
Answer: A
Juniper JN0-314 dump JN0-314
NO.7 A user's Junos Pulse client uses 802.1X to access a wired network and is failing to authenticate. You
run a packet capture from the user's PC and notice that immediately after the client machine sends an
EAPoL-start packet, an EAP-failure packet is returned. You review the RADIUS troubleshooting logs on
the MAG Series device and do not see any authentication attempts from the user. Other users on the
same Ethernet switch are successfully authenticating.
Which device is sending the EAP-failure packet to the workstation?
A. The RADIUS server
B. The EAPoL server
C. The workstation's network adapter
D. The Ethernet switch
Answer: D
Juniper dump JN0-314 dumps JN0-314 JN0-314 pdf JN0-314자격증
NO.8 Which three settings are accessible from the serial console menu on a MAG Series device? (Choose
three.)
A. The ping command
B. Factory default reset
C. Personality image
D. License imports
E. Admin login credentials
Answer: A,B,E
Juniper시험문제 JN0-314자료 JN0-314인증 JN0-314 JN0-314
NO.9 You want to ensure that users who access the company's protected resources present a client
certificate before they are allowed to sign in.
What should you configure?
A. A certificate authentication policy that allows all users and remembers certificate information while the
user is signed in.
B. A certificate authentication policy that only allows users with a client-side certificate signed by a trusted
client CA to sign in.
C. A certificate role restriction that allows all users and remembers certificate information while the user is
signed in.
D. A certificate role restriction that only allows users with a client-side certificate signed by a trusted client
CA to sign in.
Answer: B
Juniper dump JN0-314 JN0-314최신덤프 JN0-314기출문제 JN0-314
NO.10 You navigate to "UAC" > "Infranet Enforcer" > "Auth Table Mapping" in the admin GUI. You see one
policy, which is the unmodified, original default policy.
Which statement is true?
A. Dynamic auth table mapping is not enabled.
B. A successful authentication attempt will result in a new authentication table entry, which will be
delivered only to the Junos enforcer protecting the network from which the user has authenticated.
C. To create a static auth table mapping, you must delete the default policy.
D. The default policy applies only to the factory-default role User.
Answer: A
Juniper자료 JN0-314 JN0-314최신덤프 JN0-314 pdf
NO.11 You have a Junos Pulse Secure Access Service acting as an IF-MAP client, configured to federate all
user roles to a Junos Pulse Access Control Service acting as an IF-MAP Federation server. A remote user
using Junos Pulse logs in to the Junos Pulse Secure Access Service; the Junos Pulse Secure Access
Service provisions a remote access session for that user.
What happens next?
A. The Junos Pulse Secure Access Service redirects the user to the Junos Pulse Secure Access Service
for authentication
B. The Junos Pulse Access Control Service provisions enforcement points to enable resource access for
that user.
C. The Junos Pulse Secure Access Service publishes user session and role information to the IFMAP
Federation server,
D. The Junos Pulse Secure Access Service provisions enforcement points to enable resource access for
that user.
Answer: C
Juniper JN0-314 JN0-314 JN0-314 JN0-314 JN0-314
NO.12 A customer has purchased a third-party switch to use for Layer 2 access with their Junos Pulse Access
Control Service. When configuring the switch on the Junos Pulse Access Control Service, the customer
does not find a make/model entry for it.
Which two actions should the customer take to make the switch work with the Junos Pulse Access Control
Service? (Choose two.)
A. Add the switch to the Junos Pulse Access Control Service as a standard RADIUS.
B. Add the switch to the Junos Pulse Access Control Service using the "Any" make/model.
C. Add the switch as a firewall enforcer.
D. Obtain and configure the RADIUS dictionary for the switch and use that vendor listing for the
make/model.
Answer: A,D
Juniper JN0-314 JN0-314시험문제
NO.13 What are two ways to access the Junos Pulse Access Control Service? (Choose two.)
A. admin GUI
B. Telnet
C. SSH
D. console
Answer: B,C
Juniper JN0-314 pdf JN0-314 JN0-314 dump
NO.14 A customer wants to create a custom Junos Pulse configuration. Which two are required? (Choose two)
A. Connection set
B. Configuration set
C. Custom installer
D. Component set
Answer: A,D
Juniper시험문제 JN0-314최신덤프 JN0-314 JN0-314 dumps JN0-314
NO.15 You are configuring an active/passive cluster of SRX Series devices as the firewall enforcer on a MAG
Series device. Which statement is true?
A. Multiple Infranet Enforcer instances are created with a single serial number of an SRX Series device
defined in each configuration.
B. A single Infranet Enforcer instance is created with both serial numbers of the clustered SRX Series
devices defined in the configuration.
C. Multiple Infranet Enforcer instances are created with a single IP address of an SRX Series device
defined in each configuration.
D. A single Infranet Enforcer instance is created with the VIP of the clustered SRX Series device defined
in the configuration.
Answer: B
Juniper JN0-314 JN0-314 pdf JN0-314덤프 JN0-314
ITexamdump의 000-622덤프의 VCE테스트프로그램과 000-155덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1z0-599시험에 대비한 고품질 덤프와 C_TFIN22_64시험 최신버전덤프를 제공해드립니다. 최고품질 MB5-854시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기