IT인증시험이 다가오는데 어느 부분부터 공부해야 할지 망설이고 있다구요? 가장 간편하고 시간을 절약하며 한방에 자격증을 취득할수 있는 최고의 방법을 추천해드립니다. 바로 우리ITExamDump IT인증덤프제공사이트입니다. ITExamDump는 고품질 고적중율을 취지로 하여 여러분들인 한방에 시험에서 패스하도록 최선을 다하고 있습니다. Juniper인증JN0-314시험준비중이신 분들은ITExamDump 에서 출시한Juniper인증JN0-314 덤프를 선택하세요.
IT업계 취업 준비생이라면 국제적으로도 승인받는 IT인증자격증 정도는 몇개 취득해야 하지 않을가 싶습니다. Juniper인증 JN0-314시험을 통과하여 인기 자격증을 취득하시면 취업경쟁율이 제고되어 취업이 쉬워집니다. ITExamDump의Juniper인증 JN0-314덤프는 많은 시험본 분들에 의해 검증된 최신 최고의 덤프공부자료입니다.망설이지 마시고ITExamDump제품으로 한번 가보세요.
거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면Juniper인증 JN0-314시험은 무조건 패스해야 합니다. 하지만Juniper인증 JN0-314시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는Juniper인증 JN0-314시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전Juniper인증 JN0-314덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는Juniper인증 JN0-314영어버전덤프만 공부하시면 자격증을 딸수 있습니다.
시험 번호/코드: JN0-314
시험 이름: Juniper (Junos Pulse Access Control, Specialist (JNCIS-AC))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 115 문항
업데이트: 2013-12-11
ITExamDump의 Juniper인증 JN0-314덤프는 다른 덤프판매 사이트보다 저렴한 가격으로 여러분들께 가볍게 다가갑니다. Juniper인증 JN0-314덤프는 기출문제와 예상문제로 되어있어 시험패스는 시간문제뿐입니다.
ITExamDump 에서 제공해드리는 Juniper인증JN0-314시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. Juniper인증JN0-314시험은ITExamDump 표Juniper인증JN0-314덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.
ITExamDump의 Juniper 인증 JN0-314시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 Juniper 인증 JN0-314실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 Juniper 인증 JN0-314실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. ITExamDump의 Juniper 인증 JN0-314덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.
Juniper인증 JN0-314시험이 너무 어려워 보여서 오르지못할 산처럼 보이시나요? 그건ITExamDump의 Juniper인증 JN0-314시험문제에 대비하여 제작한Juniper인증 JN0-314덤프가 있다는 것을 모르고 있기때문입니다. Juniper인증 JN0-314시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 Juniper인증 JN0-314덤프로 시험공부를 해보세요.시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다.
JN0-314 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-314.html
NO.1 You want to ensure that users who access the company's protected resources present a client
certificate before they are allowed to sign in.
What should you configure?
A. A certificate authentication policy that allows all users and remembers certificate information while the
user is signed in.
B. A certificate authentication policy that only allows users with a client-side certificate signed by a trusted
client CA to sign in.
C. A certificate role restriction that allows all users and remembers certificate information while the user is
signed in.
D. A certificate role restriction that only allows users with a client-side certificate signed by a trusted client
CA to sign in.
Answer: B
Juniper JN0-314자료 JN0-314 JN0-314자료 JN0-314
NO.2 A user's Junos Pulse client uses 802.1X to access a wired network and is failing to authenticate. You
run a packet capture from the user's PC and notice that immediately after the client machine sends an
EAPoL-start packet, an EAP-failure packet is returned. You review the RADIUS troubleshooting logs on
the MAG Series device and do not see any authentication attempts from the user. Other users on the
same Ethernet switch are successfully authenticating.
Which device is sending the EAP-failure packet to the workstation?
A. The RADIUS server
B. The EAPoL server
C. The workstation's network adapter
D. The Ethernet switch
Answer: D
Juniper JN0-314 dumps JN0-314 JN0-314
NO.3 What is a type of firewall enforcer supported by the Junos Pulse Access Control Service.?
A. Checkpoint firewall
B. SRX Series device
C. DP sensor
D. MX Series device
Answer: A
Juniper JN0-314인증 JN0-314자격증 JN0-314
NO.4 You have a firewall enforcer protecting resources in a data center. A user is experiencing difficulty
connecting to a protected resource.
Which two elements must exist so the user can access the resource? (Choose two.)
A. Resource access policy on the MAG Series device
B. IPsec routing policy on the MAG Series device
C. General traffic policy blocking access through the firewall enforcer
D. Auth table entry on the firewall enforcer
Answer: A,D
Juniper JN0-314 JN0-314 JN0-314 dump JN0-314
NO.5 You have a Junos Pulse Secure Access Service acting as an IF-MAP client, configured to federate all
user roles to a Junos Pulse Access Control Service acting as an IF-MAP Federation server. A remote user
using Junos Pulse logs in to the Junos Pulse Secure Access Service; the Junos Pulse Secure Access
Service provisions a remote access session for that user.
What happens next?
A. The Junos Pulse Secure Access Service redirects the user to the Junos Pulse Secure Access Service
for authentication
B. The Junos Pulse Access Control Service provisions enforcement points to enable resource access for
that user.
C. The Junos Pulse Secure Access Service publishes user session and role information to the IFMAP
Federation server,
D. The Junos Pulse Secure Access Service provisions enforcement points to enable resource access for
that user.
Answer: C
Juniper JN0-314최신덤프 JN0-314 JN0-314
NO.6 Click the Exhibit button.
What is the cause of the error shown in the exhibit?
A. A RADIUS request is being received from a device that is not configured on the RADIUS Client page.
B. A user entered an incorrect password during RADIUS authentication.
C. A RADIUS proxy attempt failed to reach the configured proxy server.
D. The RADIUS shared secret is incorrect.
Answer: A
Juniper JN0-314 dump JN0-314 JN0-314
NO.7 What are two ways to access the Junos Pulse Access Control Service? (Choose two.)
A. admin GUI
B. Telnet
C. SSH
D. console
Answer: B,C
Juniper JN0-314 JN0-314덤프 JN0-314
NO.8 Which three settings are accessible from the serial console menu on a MAG Series device? (Choose
three.)
A. The ping command
B. Factory default reset
C. Personality image
D. License imports
E. Admin login credentials
Answer: A,B,E
Juniper JN0-314인증 JN0-314 JN0-314 dump JN0-314 dump JN0-314 dump
NO.9 You are configuring an IPsec routing policy that will be used with a ScreenOS firewall enforcer. What
must you also configure?
A. Source IP policies on the ScreenOS device
B. ScreenOS IPsec policies on the Junos Pulse Access Control Service
C. VPN NAT traversal on the ScreenOS device
D. Source interface policies on the Junos Pulse Access Control Service
Answer: B
Juniper시험문제 JN0-314인증 JN0-314 JN0-314
NO.10 A customer has purchased a third-party switch to use for Layer 2 access with their Junos Pulse Access
Control Service. When configuring the switch on the Junos Pulse Access Control Service, the customer
does not find a make/model entry for it.
Which two actions should the customer take to make the switch work with the Junos Pulse Access Control
Service? (Choose two.)
A. Add the switch to the Junos Pulse Access Control Service as a standard RADIUS.
B. Add the switch to the Junos Pulse Access Control Service using the "Any" make/model.
C. Add the switch as a firewall enforcer.
D. Obtain and configure the RADIUS dictionary for the switch and use that vendor listing for the
make/model.
Answer: A,D
Juniper JN0-314 dump JN0-314 JN0-314 dumps JN0-314기출문제
NO.11 You navigate to "UAC" > "Infranet Enforcer" > "Auth Table Mapping" in the admin GUI. You see one
policy, which is the unmodified, original default policy.
Which statement is true?
A. Dynamic auth table mapping is not enabled.
B. A successful authentication attempt will result in a new authentication table entry, which will be
delivered only to the Junos enforcer protecting the network from which the user has authenticated.
C. To create a static auth table mapping, you must delete the default policy.
D. The default policy applies only to the factory-default role User.
Answer: A
Juniper JN0-314 JN0-314자료 JN0-314최신덤프 JN0-314 dumps
NO.12 A customer wants to create a custom Junos Pulse configuration. Which two are required? (Choose two)
A. Connection set
B. Configuration set
C. Custom installer
D. Component set
Answer: A,D
Juniper최신덤프 JN0-314 JN0-314 pdf JN0-314
NO.13 You are configuring an active/passive cluster of SRX Series devices as the firewall enforcer on a MAG
Series device. Which statement is true?
A. Multiple Infranet Enforcer instances are created with a single serial number of an SRX Series device
defined in each configuration.
B. A single Infranet Enforcer instance is created with both serial numbers of the clustered SRX Series
devices defined in the configuration.
C. Multiple Infranet Enforcer instances are created with a single IP address of an SRX Series device
defined in each configuration.
D. A single Infranet Enforcer instance is created with the VIP of the clustered SRX Series device defined
in the configuration.
Answer: B
Juniper시험문제 JN0-314시험문제 JN0-314인증
NO.14 What is the function of Host Checker?
A. To allow clientless access to the network
B. To restrict access to protected resources on the network
C. To scan an endpointfor compliance with security policies
D. To push a firewall policy to the endpoint's local firewall application
Answer: B
Juniper JN0-314 JN0-314 JN0-314시험문제
NO.15 A customer is trying to decide which 802.1X inner protocol to use on their network. The customer
requires that no passwords be sent across the network in plain text, that the protocol be supported by the
Windows native supplicant, and that the protocol supports password changes at Layer 2.
Which protocol would meet the customer's needs?
A. EAP-TLS
B. EAP-MD5
C. PAP
D. EAP-MSCHAPv2
Answer: D
Juniper JN0-314 JN0-314
ITexamdump의 FCNSP.v5덤프의 VCE테스트프로그램과 000-120덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-196시험에 대비한 고품질 덤프와 70-460시험 최신버전덤프를 제공해드립니다. 최고품질 ACMA_6.1시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기